4622..... Crap... Start here till I figure out...

[Weavs33]

did not study for structual at all, pretty sure i guessed on all of them, except maybe a truss one

 

[scary dog PE]

The point at which you find out is only a moment and then you move on with life. Either preparing to take the test again or preparing to pay the fees for you PE License.

Doesn't matter when it comes. Only that you are determined that that moment will come.

True, but with another kid on the way in December (#3) I would prefer to get this over with now.

You will be out-numbered...after that all bets are off you might as well keep adding to the brood!!!

although I stopped at 3 mine are all 4 years apart and I will begin my 12 college payments in the fall!!!

 

[Weavs33]

You have to build 300lf of a 5' high concrete wall that is 1' thick. You use 4' by 8' sheets of plywood to build the forms, how much SF of forms do you need to build the wall.

3300 SF?

 

[sycamore PE]

Post

 

[scary dog PE]

I left out years...that is "12 years of college payment"

 

[NJmike PE]

The point at which you find out is only a moment and then you move on with life. Either preparing to take the test again or preparing to pay the fees for you PE License.

Doesn't matter when it comes. Only that you are determined that that moment will come.

True, but with another kid on the way in December (#3) I would prefer to get this over with now.

You will be out-numbered...after that all bets are off you might as well keep adding to the brood!!!

although I stopped at 3 mine are all 4 years apart and I will begin my 12 college payments in the fall!!!

Top

when #3 come, mine will be 4, 2.5 and noob. so roughly 2 yrs apart

 

[bknewto7 PE]

FOR THE SWARM!

 

[pabelong PE]

post

 

[NJmike PE]

my first top. there goes the cherry

 

[Judowolf PE]

if you don't alter the 4x8 sheets, you have to turn the sheets to the 8' side up and down so there is not a diff between a 5' wall or an 8' wall as far as forms go

 

[sycamore PE]

Post

 

[Judowolf PE]

75 sheets each way + 1 for each end

 

[Judowolf PE]

152*4*8->4864sqft

 

[Weavs33]

ahh the ends, yea, i read that wrong, didnt add up the sheets needed, i didnt have my 4 options to choose from though

 

[Dexman PE PMP]

You have to build 300lf of a 5' high concrete wall that is 1' thick. You use 4' by 8' sheets of plywood to build the forms, how much SF of forms do you need to build the wall.

3300 SF?

Face = 300x5 = 1500

Back = 300x5 = 1500

Ends = 5x1 = 5 (x2)

3010 SF.

The size of the plywood doesn't matter. Just like the cutscore...

 

[bknewto7 PE]

152*4*8->4864sqft

Im sorry but the correct answer is Bacon

 

[Judowolf PE]

Dex may have a different opinion

 

[Weavs33]

You have to build 300lf of a 5' high concrete wall that is 1' thick. You use 4' by 8' sheets of plywood to build the forms, how much SF of forms do you need to build the wall.

3300 SF?

Face = 300x5 = 1500

Back = 300x5 = 1500

Ends = 5x1 = 5 (x2)

3010 SF.

The size of the plywood doesn't matter.

crap, calculated the top not the ends, WTF??? need more coffee

 

[Judowolf PE]

You have to build 300lf of a 5' high concrete wall that is 1' thick. You use 4' by 8' sheets of plywood to build the forms, how much SF of forms do you need to build the wall.

3300 SF?

Face = 300x5 = 1500Back = 300x5 = 1500

Ends = 5x1 = 5 (x2)

3010 SF.

The size of the plywood doesn't matter.

That's why I said if you don't alter the sheets....

 

[Dexman PE PMP]

But the original question did not say you couldn't alter them