Yeah, reviewing my options.
Anyone taken the NSPE Mech MDM course here and care to give a review?
http://pereviewcourse.com/mechanical-pe-review/
Machine Design & Materials Oct 2018
- Thread starter monty01
- Start date
Help Support Professional Engineer & PE Exam Forum:
Anyone taken the NSPE Mech MDM course here and care to give a review?
http://pereviewcourse.com/mechanical-pe-review/
I highly recommend the DTC course but you're going to have to supplement it with other sources. Read my recent post, it's long but I hope it saves you the headache of having to take the exam more than once like I did.
Good luck to you !
Good luck to you !
squaretaper LIT AF PE
UNCE UNCE UNCE
- Joined
- Nov 2, 2017
- Messages
- 14,180
- Reaction score
- 3,280
I do not recommend the NSPE/MGI/Cognistar review course. All you get are a couple binders with so-so notes, you work on practice problems and exams, then you send them in for grading. You're better off with the "new generation" of test prep (DTC, EngProGuides, Slay, etc.).
You're welcome man... if you have questions once you start studying feel free to reach out to me. I'm glad to help another fellow engineer pass this exam the FIRST time...I'd recommend you start hitting the books in early July.
Well, how is everybody's studying coming along? I'm still plugging away with Dr Tom's review. I feel like i'm getting familiar with the MERM, so that makes me feel a bit better. I can tell that i'm going to need to go back over the early weeks again to keep things fresh.
At the end of the course there is a refresher quizz for the earlier weeks...I recommend that in addition to that, you keep doing problems from the earlier chapters to keep things fresh as you said... good luck studying !
Alright, about to start week 18 of 20. Some vibration stuff from here on out and then it's time to start cranking them out from start to finish to keep the edge sharp. I think that while i'm doing refresher problems from beginning to end, I'm going to go to that section in the MERM and tab the useful charts, graphs, etc. The appendix is jam packed full of info, so i'm going to focus tabbing that as well.
How is everybody doing with their review/studying?
How is everybody doing with their review/studying?
I am taking the MDM exam on Oct 2018. Starting preparation with MERM and NCEES practice exam. I have few questiosn:
How difficult the real exam, compare to the NCEES practice exam? I took the practice exam and I feel very comfortable. I am able to solve most of the problems. I am wondering if the real one will be the same level.
I have specific question about Question 123. In the solution to the 123 problems, the secondary shear stress is shows as anti-clock direction. I hope it is it other way. I beleive the answer should be (A) the 1 bolt. Anyone who worked out that problem can help me?
How difficult the real exam, compare to the NCEES practice exam? I took the practice exam and I feel very comfortable. I am able to solve most of the problems. I am wondering if the real one will be the same level.
I have specific question about Question 123. In the solution to the 123 problems, the secondary shear stress is shows as anti-clock direction. I hope it is it other way. I beleive the answer should be (A) the 1 bolt. Anyone who worked out that problem can help me?
justin-hawaii
Justin PE
I think that the NCEES practice exam is representative of the actual exam, see the link and excerpt below. According to the NCEES the practice exams contain questions from past exams.
https://ncees.org/exams/exam-preparation-materials/
NCEES practice exams help you determine what you know—and what you don’t know—before taking the exam. NCEES practice exams
https://ncees.org/exams/exam-preparation-materials/
NCEES practice exams help you determine what you know—and what you don’t know—before taking the exam. NCEES practice exams
- Contain questions from past exams
- Simulate the format, style, and level of difficulty
- Provide solutions or feedback on performance in each topic area
I don't have my NCEES booklet with me at the moment, but i'll go back and see if I've already worked this one. With just the description you outlined, it seems to be a combined loading problem. Bending and torsional shear?
Okay, on #123:
The direct shear and torsional shear are additive (in the same downward direction) for bolt number 4. This makes it the highest stressed bolt in the group.
Audi Driver P.E.
Well-known member
- Joined
- Sep 21, 2015
- Messages
- 4,851
- Reaction score
- 1,675
Definitely not 8-10 weeks, my experience after taking the exam multiple times was that the wait was between 6-7 weeks, I am in California so please take that into consideration.
Looks like we have about 14 days and a wake-up. I'm starting to get a little bit nervous. My hotel is reserved, and exam authorization is in. I'm doing some early review and then it will be getting things together and organized. What's on everybody's "to-do" list?
My list:
Grab my GD&T book from work. And earplugs. And back-up calculator.
Print a copy of the Iron-Carbon phase diagram to add to the materials PRN.
Move my tabs from the top of my MERM to the bottom (easier to read).
Get wristwatch with hands and no beeping.
Practice doing problems faster.
Grab my GD&T book from work. And earplugs. And back-up calculator.
Print a copy of the Iron-Carbon phase diagram to add to the materials PRN.
Move my tabs from the top of my MERM to the bottom (easier to read).
Get wristwatch with hands and no beeping.
Practice doing problems faster.
Similar threads
