WISCONSIN - RESULTS - Page 3 - OCT 2010 - Engineer Boards
Jump to content
Engineer Boards
Sign in to follow this  
DEVANG

WISCONSIN - RESULTS

Recommended Posts

We'll all know soon enough. It would be nice to not have to study to take the test a 3rd time. But I'm not sure if my guessing was enough to get me over the hump. Any of you guys electronics?

Power for me. Fingers crossed that we start to see some results in the mail tomorrow.

:please:

Share this post


Link to post
Share on other sites

WOW... Reading the VA Thread it sounds like PCS is about the SUCKIEST bunch of SUCKS to ever SUCK!! WTF

Hope i haven't retired by the time i see my results!

:suicide1:

Share this post


Link to post
Share on other sites

I know right?! I feel bad reading what they have been posting. NY is getting jerked around pretty bad too. I would actually motion the WI DRL to not use PCS any longer if I thought it would do any good. Perhaps PCS should not be "administering" any type of examination that deals with engineering. Stick to the non-engineering professions which require licensure. Anyone get mail today in WI yet? :unsure:

Share this post


Link to post
Share on other sites

Hello to all,

Does any one know cut numbers (not score) for the PE Civil-Transportation? meaning 49 out of 80 is failed but 52 out of 80 is passed.

something like that!!!!

Thanks

Devang

Share this post


Link to post
Share on other sites

No mail until I get home around 5:00 P.M. I've been keeping an eye on VA & NY. They are pissed! I see some PCS states have got results, only the ones that allow NCEES notification through email/web though. Grrrr. I noticed that only 35% of repeat examinees passed the Electrical. 1 out of 3, that might not bode well for me....

Share this post


Link to post
Share on other sites

PA and VA have got their results thru PCS. Only theirs was online. So i am guessing 2 more days before PCS mails our results. I am feeling like I am in the 50's to be waiting for snail mail.

Share this post


Link to post
Share on other sites
I am feeling like I am in the 50's to be waiting for snail mail.

No kidding, get with it WI. Good grief! And I could have done without knowing the passing percentage for repeat test takers. :(

Hopefully we find out sooner than another couple days. At this point we just need to know so we can plan accordingly.

Share this post


Link to post
Share on other sites
Just an FYI - no results in today's mail.

Thanks for the update. I won't be expecting anything when I get home tonight then. :brickwall:

I guess on the bright side, if we find out tomorrow or Friday, it could be a really good weekend or really bad weekend. :holyness:

Share this post


Link to post
Share on other sites
Direct from the PCS website:

"Scores from the October 2010 exam were mailed 1/5/11 via USPS mail.

http://www.pcshq.com/pcsweb/PCSCandPg.nsf/...8c?OpenDocument

I guess some of us may know tomorrow, most of us will know on Friday. Good luck everyone!!!!

Thanks for the info schmidty99. From what I've been reading, most of the results letters are dated 12/28/10. Thanks again PCS. Good luck on results all! Hoping for a great weekend! :)

Share this post


Link to post
Share on other sites

Anyone been checking the WI DRL for additional updates to their application status?

Share this post


Link to post
Share on other sites
Anyone been checking the WI DRL for additional updates to their application status?

I have, religiously. Still says status pending and "as of" 1/3/10. Not sure if this is good or bad. Anyone else?

Share this post


Link to post
Share on other sites
Anyone been checking the WI DRL for additional updates to their application status?

I have, religiously. Still says status pending and "as of" 1/3/10. Not sure if this is good or bad. Anyone else?

I think its good, as mine has not been updated since the Board approved my application in 8/2009. That's a sinking feeling...

You said earlier that you didn't have anything under the "requirements not met" part right? If so, I believe that's a good sign also!

Share this post


Link to post
Share on other sites

Oh crap! I'm sorry, knight1fox3. you were saying 1/3/10 and I was reading it as 1/3/11. Sorry...hope I didn't get your hopes up. Hopefully it doesn't mean anything and we'll all pass. Like I said, mines not updated either.

Share this post


Link to post
Share on other sites
Anyone been checking the WI DRL for additional updates to their application status?

I have, religiously. Still says status pending and "as of" 1/3/10. Not sure if this is good or bad. Anyone else?

I think its good, as mine has not been updated since the Board approved my application in 8/2009. That's a sinking feeling...

You said earlier that you didn't have anything under the "requirements not met" part right? If so, I believe that's a good sign also!

I will say that it has boosted my spirits a bit, but I don't think it necessarily indicates whether you passed or failed. Correct, I do not have anything under "requirements not met". But that just means I have all the licensing requirements met contigent upon passing the exam. The requirement "engineer" means I have the necessary 4 years of experience (on top of my 4 year degree) as approved by the board. Perhaps the board is questioning your references and/or engineering experience? During your application process, were you ever notified that your application was in question? I recall receiving an email with a link provided that showed the status of the application. I believe the email also indicated that the applicant was responsible for addressing any items in the "requirements not met" field. Just my :2cents:

Share this post


Link to post
Share on other sites
Oh crap! I'm sorry, knight1fox3. you were saying 1/3/10 and I was reading it as 1/3/11. Sorry...hope I didn't get your hopes up. Hopefully it doesn't mean anything and we'll all pass. Like I said, mines not updated either.

My post was in error. It should have read "as of" 1/3/11. Apparently I still haven't adjusted to the new year yet. :rolleyes:

Share this post


Link to post
Share on other sites

Good to hear, I still think its good news.

I disagree with the status. This is what mine says under Requirements not Met:

"Engineer | You must register with the testing service PCS at www.pcshq.com if you have not yet done so. This requirement will remain "NotMet" until the exam has been passed."

Then when you pass I believe "Engineer" should turn green move to Requirements Met. I've found that under several other random folks in the credential lookup. Then the application status line should turn to "permanent license issued" eventually. I would guess you don't have that yet?

Share this post


Link to post
Share on other sites
Good to hear, I still think its good news.

I disagree with the status. This is what mine says under Requirements not Met:

"Engineer | You must register with the testing service PCS at www.pcshq.com if you have not yet done so. This requirement will remain "NotMet" until the exam has been passed."

Then when you pass I believe "Engineer" should turn green move to Requirements Met. I've found that under several other random folks in the credential lookup. Then the application status line should turn to "permanent license issued" eventually. I would guess you don't have that yet?

You certainly make a convincing argument and continue to make me feel better with the long wait. :) And that is correct, I've seen other PEs (my wife being one of them) with their status that reads "permanent license issued". Mine unfortunately does not say this.

Share this post


Link to post
Share on other sites

Sounds good. Well, the way its going I should expect to get my fail letter. Can anyone else chime in about the DRL site and if there status has been updated or not?

Share this post


Link to post
Share on other sites
Sounds good. Well, the way its going I should expect to get my fail letter. Can anyone else chime in about the DRL site and if there status has been updated or not?

This goes back a few years now, but I would be surprised if the DRL procedure is much different from when I was originally licensed.

I don't believe the website was updated to say anything about licensure until after I had faxed in a final form after I received my passing letter in the mail. This is how I remember it anyway.

The process was; get the passing letter in the mail, fill out a single sheet form with a bit of information and a signature, fax the form, DRL received the form, compared my name to the name of known passers, issed licensed, and updated the database.

Hopefully I'm not giving anyone bad information, but I believe this was the procedure.

Share this post


Link to post
Share on other sites

I agree with WoodSlinger, I went through this 6 months ago, and you'll get your pass/fail letter before the DRL website changes. It will change eventually though, I think only after I sent in Form #2727 and got the state of MI to send my FE results to Wisconsin did the DRL website get updated.

Good luck everyone!

Edited by mtu_huskies

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...