With my bare hands?? Or do I need a special rubber suit?To test it, jump start the car, then with it running, remove the battery positive cable.
Good idea! I mean the going to the parts store and testing the alternator.I would jump start the car then drive it to a place to test the alternator, it can be done without removing the alternator from the vehicle at most parts stores. Usually alternators go bad due to a cheap matrix of diodes costing around 75 cents. Remanufactured alternators simply have new diodes. If you really want to be cheap, buy a 'new' reman alternator, swap the diodes and return it for your money back!
There are a bunch of lights that come on when I try to start it! Like every light on the dash board starts flashing.Clicking sounds more like a starter issue. Knock on the starter with a hammer and see if it starts. Usually a dead/dying alternator will make a combination of warning lights come on the dash (possibly the brake and battery lights). Could be the alternator, just sounds like a bad starter.
Yes, but not for testing your battery.do I need a special rubber suit?
I meant while the car is running. What kind of car is it again?There are a bunch of lights that come on when I try to start it! Like every light on the dash board starts flashing.
:Locolaugh:
I'd pull the negative (-) cable instead. You will achieve the same result and if you touch the fender with it, nothing bad will happen.And yes, you can yank the (+) battery cable off while the car is running (not while starting though; that would take guts). Just maintain positive control of the (+) wire and don't let it touch anything else. That would be bad.
Enter your email address to join: