Quantcast

So...How long did you study what was your game plan and what was your result

Help Support Engineer Boards:

REsonance503

Member
Joined
Dec 10, 2016
Messages
18
Reaction score
0
I'm curious what most people did to prepare.

Discipline? Prepare time? What study materials did you use, bring to the exam? How did it work for you? What would you have done differently?

Me:

Electronics

I took a week off work and crammed, probably around 40 hours total.

I purchased the PPI study materials but did not take the class. I mainly studied the NCEES practice exam, tabbed my books.

Passed.

I would have taken more reference books in with me.

 

FlashPoint

Member
Joined
Nov 1, 2016
Messages
52
Reaction score
11
Mechanical -TF

Took Testmasters class (96hrs), studied at home for 200hrs

Used MERM, unit conversion book, test masters binder, my own adhoc binder, pe practice exam, two rulers, plenty of snacks, lunch, water, energy drinks

Passed, barely.

The afternoon session ate my lunch, probably diversify my study material.

 

Keaton

New member
Joined
Dec 6, 2016
Messages
2
Reaction score
0
Mechanical - TF

Studied at weekends for 2 months (approx. 200 hrs)

Used MERM, separate binders of 1) appendices, 2) unit conversion table(of my own), 3) extra sheets of psychrometric chart, mollier diagram

Passed

Keeping physical condition for 8 hrs is the key point. I was a bit tired and couldn't concentrate in the latter half.

 

Rapt0r

Member
Joined
Dec 14, 2016
Messages
11
Reaction score
0
PE Civil Construction - NY

PASSED

Self studied every day during the week from 3:30pm to 8:00pm and 12 hours every weekend for three months. Also took every Monday off one month prior to the exam and the day before the exam. I would say I spent easily 350 hours studying.

I used the Learn Civil Engineering afternoon guide for construction (highly recommended for the PE Civil Construction). I also used the CERM, NCEES practice test, all resource books listed on the NCEES Construction testing list, took PPE practice exams once every month on all subject areas (geo, trans, structural, construction, water resources). Made my own binder with key concepts and formulas for each subject area tied to the NCEES topics.  My library at work was a great help due to the cost for each reference.

I wish I had more time to study. During the three months leading up to the exam I found out I was having my first child (due in April) and changed my job. Failing this fall exam was not an option seeing the due date was April 25th and the next exam being offered was April 21st.

 

Mr_Duct

Member
Joined
Dec 8, 2016
Messages
19
Reaction score
3
Mechanical: HVAC + Refrigeration

Overall time studying: 450+ hours mostly in the 5 months leading up to the October 2016 exam and a chunk of hours in the past couple years prior to taking the October 2016 exam ... but I never took any previous exams.  This was the only PE exam I have taken.  

I took approaching the exam very seriously and I would most likely fail if I didn't.  I have solved at least 90% of the problems in the MERM (Mechanical Engineering Reference Manual by Lindeburg) companion problems and most of the sample problems in the MERM itself.  I bought sample exams including NCEES exams, 6 Minute Solutions, and old school practice exam problems that are 1 hour long and have partial credit.  I bought a few textbooks (like Shigley's Mechanical Design) and solved problems from those.  I am sure that I have solved at least different 1,500 problems.

I made eight (8) 2" binders full of notes, sample problems, charts, and tables separated by topics.  1 binder had the MERM appendix and it was much easier to look through than the giant MERM book appendix.  

I passed the exam.  :D

 

TNSparky

Well-known member
Joined
Dec 5, 2016
Messages
203
Reaction score
52
Location
Somewhere over the rainbow.....
Electrical - Power.

Studied on my own for about 180 hours. Then took School of PE live review. Worked the practice test afterwards. 

Probably around 220-250 hours total. 

Passed.

 

Excelsior

New member
Joined
Dec 20, 2016
Messages
2
Reaction score
0
Location
California
Civil - Structural

I spent about 20 hours total studying for this specific exam (I was also trying to study for seismic and surveying since I live in California).  I studied all on my own - no SoPE, EET, or anything like that.  Most of my studying was going through the NCEES practice test and figuring out what my strengths and weaknesses were.  I also spent some time making sure I really understood where everything was in my resources.

My resources were pretty much all of the design standards listed in the NCEES exam specifications - AASHTO, IBC (as CBC 2013), ASCE 7, ACI 318, AISC, NDS, TMS 402/602, OSHA, and PCI.  (The exam specifications also mention AWS - I looked at those briefly but did not bring them with me.)  I also had my NCEES practice test, the FE reference manual (I remembered the layout well from when I took the FE and thought it would be helpful, and it was), a structural analysis textbook, a steel design textbook, and a reinforced concrete design textbook.  My AISC, TMS, and PCI resources were one version older than what is on the current list, but I did not suffer any ill effects because of that.  I did not have the CERM.

I passed.

If I had to do it again, I would study a little more soil mechanics/geotechnical engineering, as that was probably my weakest section on the morning portion.  For the afternoon, I would have studied NDS and TMS more for masonry and wood design, as I have much more experience with AISC and ACI for steel and concrete design and found those problems to be relatively easier.

 

14bk41

Member
Joined
Dec 8, 2016
Messages
34
Reaction score
4
Location
Virginia
Electrical - Power

Took the SOPE live class (4 hrs a night, 4 nights a week for 5 weeks) - Sub-total: 80hrs.  Weekends on my own - about 75hrs.  Last week before exam - about 40hrs (took 4 days off from work).  Total about ~200 hrs.  Was a bit panic and feeling unprepared at the end.

Passed (first time).  AM session took me about 3.5 hours and PM session about 2.5 hours.   I think I did well thanks to the qualitative questions..

If I had to do it again?  Bring a copy of NESC.  Dress in layers (morning was ok but afternoon was roasting as the old ladies (proctors) cranked up the heat!

 

smahurin

Member
Joined
Dec 8, 2015
Messages
215
Reaction score
36
Civil/Structural.  Somewhere in the 30-40hr range.  Self study.  NCEES practice exam and PPI 6 minute solved problems.  I only half finished the PPI questions... they were terrible.

SE exam (both). Somewhere around 120hrs.  Self study.  Ran through my class notes.  Summarized class notes into a single 3-ring binder.  Took NCEES practice exam and PPI practice exam.  

Passed both.

 

ISpitHotFire PE

Supporting Member
Joined
Dec 19, 2016
Messages
40
Reaction score
8
Civil Construction

Spent ~250 hours over 12 weeks studying, primarily through School of PE (80 hours of classes). I felt very prepared compared to others I've talked to. Used School of PE problems, NCEES practice exam, and several other practice problem books - all of which were helpful. I believe 12 weeks is a perfect amount of time to study, any less isn't enough and any more will burn you out come test day. Also kind of depends on how fresh some of the material is for you.

Passed on the first attempt.

 

tj_PE

☑️ Verified Wino
Joined
May 18, 2016
Messages
10,625
Reaction score
3,085
Location
northleft
Civil/Structural.  Somewhere in the 30-40hr range.  Self study.  NCEES practice exam and PPI 6 minute solved problems.  I only half finished the PPI questions... they were terrible.

SE exam (both). Somewhere around 120hrs.  Self study.  Ran through my class notes.  Summarized class notes into a single 3-ring binder.  Took NCEES practice exam and PPI practice exam.  

Passed both.
you're a machine! i hope i can pass with 120hrs for the SE. we were similar in actual study hours for the PE, but i had to take it 2x. I blame test anxiety. 

I'm gearing up to start thinking about when I should take the SE and am leaning towards doing one day at a time. anyway, congrats!

 

tj_PE

☑️ Verified Wino
Joined
May 18, 2016
Messages
10,625
Reaction score
3,085
Location
northleft
Civil Structural

I studied for about 16 hours for the first round (I was bed ridden sick the weekend before the exam so it would have been double), failed with 52/80 April 2016.

I studied for another 16 hours for the second round. Passed October 2016.

I was not confident and did not feel significantly prepared. I was very familiar and tabbed the shit out of my references, but If i had to do it again, I would study somewhere around the 50-60 hour range and do a lot more practice problems. I forgot I had the CERM companion practice problems until i was packing up my references to take to the exam, and was like WTF. So yeah. I think sometimes the more people prepare the more confident they feel in answering the problems, which helps them pass. I would have prefered to go that route, but there's no way I could focus enough to spend 300 hours because I get distracted SO easily. Mad props to everyone who found the system that worked for them!!

Next up, SE...someday. not looking forward to it.

 

DTG3K

Member
Joined
Dec 6, 2016
Messages
24
Reaction score
1
Civil Water Resources & Environmental

Started studying the moment i was approved on June 20th. Studied almost everyday at least 3 hours. With a couple days off here and  there. So give or take 300 hours. 
160ish was School of PE. Both the previous semesters and the current ones On Demand. 

Passed first try Oct 2016

 

snickerd3

Taking suggestions
Joined
Nov 3, 2006
Messages
16,975
Reaction score
2,078
Location
unpadded cell
Chemical

About year before i started reading the ChERM during lunch and breaks at work.  About 6 months before I kept at the ChERM, the ChERM practice problems and 6 minutes solutions during lunch/breaks and probably 3 hrs at home every night.  about 3 month out I added 3-4 hrs sat/sun too.  I took some textbooks with to the exam, but really the ChERM did me just fine.  I passed.  

mr snick was traveling a lot for work at the time, like only home on weekend sort of thing, and no kids at the time so no family guilt.  

 

Candy

Member
Joined
Dec 15, 2016
Messages
6
Reaction score
2
180 hours total for PE structural Depth, seismic and surveying. Didn't go to any courses and pass at the first try.

 

merp

Member
Joined
Oct 28, 2016
Messages
33
Reaction score
5
Took Testmasters (96 hr) and probably studied another 30-40 hr outside of class.

Passed Transportation on the first try.

 

WA_Civil_PE

Member
Joined
Dec 9, 2016
Messages
24
Reaction score
4
Location
West Pasco, WA
Civil/Structural

April 2016: Company paid for ASCE civil review course (breadth). I briefly looked over code references prior to exam.  Went through NCEES practice exam.  Solved a few problems for each afternoon area.  Failed with 50/80.

October 2016: Re-reviewed ASCE breadth notes.  Paid for EET Structural Depth On-Demand Course.  Spent 1-2 days per weekend studying for about 3 months (fortunately I work 4-10's and get long weekends).  Solved close to 200 problems in all categorizes covered by the exam (put into an organized/tabbed binder).  Probably close to 250-300 hours of studying.  Pass.

I work mainly as a mechanical engineer (BSCE, MSME) that does seldom structural analysis and/or review.  My exam review was more extensive due to the lack of regular code usage at work.

Put in the work and you'll get the results.

 

Eva

Member
Joined
Jun 14, 2016
Messages
56
Reaction score
2
Civil/Geotechnical - CA

~ 180 hours for 8hrs and two state specific exams all together. Signed up EET for seismic and self-studied the other two. Passed all three in Oct.  

 

Latest posts

Top