txjennah PE
UNTZ UNTZ UNTZ
Thank you!Yes for sure!!! I hope to have positive results from the April exam and will be able to share any advice that I have.
Congratulations on getting married, you must be so excited!!!
Oct 2017 Cut Score?
- Thread starter Danny96814
- Start date
Help Support Professional Engineer & PE Exam Forum:
justin-hawaii
Justin PE
I try to figure out the cut score each time the PE exam results are posted. Please see the links below for my survey of the Oct 2017 test takers. Sorry I only do the analysis for HVAC, Thermal, Machine Design and Power. Just like everyone else stated, it is difficult to figure out the cut score with only a limited number of responses, so use the results with caution.
HVAC & Refrigeration Survey: http://engproguides.com/hvacsurvey.html [6.4% of total test takers surveyed, estimated cut score: 56]
Thermal & Fluids Survey: http://engproguides.com/thermalsurvey.html [5.6% of total test takers surveyed, estimated cut score: 53]
Machine Design & Materials Survey: http://engproguides.com/machinesurvey.html [4.1% of total test takers estimated surveyed, cut score: 50]
Power Survey: http://engproguides.com/powersurvey.html [5.4% of total test takers surveyed, estimated cut score: 53]
HVAC & Refrigeration Survey: http://engproguides.com/hvacsurvey.html [6.4% of total test takers surveyed, estimated cut score: 56]
Thermal & Fluids Survey: http://engproguides.com/thermalsurvey.html [5.6% of total test takers surveyed, estimated cut score: 53]
Machine Design & Materials Survey: http://engproguides.com/machinesurvey.html [4.1% of total test takers estimated surveyed, cut score: 50]
Power Survey: http://engproguides.com/powersurvey.html [5.4% of total test takers surveyed, estimated cut score: 53]
Last edited by a moderator:
HomeRuns3s
New member
Failed Transportation with a 40/80.
AM: 19
PM: 21
AM: 19
PM: 21
timmer1026
Active member
@txjennah and vee043324...
I passed the PE Environmental in October 2017 after several attempts. I graduated with a Chemical Engineering degree almost 20 years ago, and have worked in the NPDES permit program since then. So, the Air and Solid Waste portion of the exam was an uphill battle for me as well as time management. I’ve found the following to be helpful in my passing of the exam.
- SOPE review course
- ASCE review course (Air portion of the course was outstanding, others were ok)
- EERM
- NCEES practice exam
- NCEES Handbook- tab the Exposure Equations for Various Pathways and the Hazardous Waste Compatibility Chart
- Environmental Engineering Solved Problems, Third Edition (R. Wane Schneiter, PhD, PE)
- Truly understand the equations, as concept questions will be easier to solve.
- Try to eliminate answers to questions you don’t know, then guess. Try not to blindly guess.
- If you’ve spent longer than 4 minutes on a problem, move on and go back to it. More than likely, you’ll realize what you’ve done wrong after you come back to it.
- Read the question carefully. Underline what the question is asking for. For example, a question asks for the freeboard above the design flow depth in feet. The design flow depth and the freeboard in inches will most likely be included in the choices.
- For Air/ Solid Waste- tab the combustion equations and R values in the EERM. Combustion/Emissions, Incineration/DRE, Stoichiometry/Material balance, Gaussian Distribution Equation/Plume Rise, Ideal Gas Law, Air Stripping, Particulate Matter control devices (baghouses, cyclones, scrubbers, ESP), Sorption/GAC, Landfills, Darcy’s Law, and Solid Waste Collection will be on the exam.
- Work and rework as much practice problems as time allows.
- Be confident. Pack your references and in your car the night before.
- Most importantly, don’t wait as long as I did while raising three children to take the exam, lol
I passed the PE Environmental in October 2017 after several attempts. I graduated with a Chemical Engineering degree almost 20 years ago, and have worked in the NPDES permit program since then. So, the Air and Solid Waste portion of the exam was an uphill battle for me as well as time management. I’ve found the following to be helpful in my passing of the exam.
- SOPE review course
- ASCE review course (Air portion of the course was outstanding, others were ok)
- EERM
- NCEES practice exam
- NCEES Handbook- tab the Exposure Equations for Various Pathways and the Hazardous Waste Compatibility Chart
- Environmental Engineering Solved Problems, Third Edition (R. Wane Schneiter, PhD, PE)
- Truly understand the equations, as concept questions will be easier to solve.
- Try to eliminate answers to questions you don’t know, then guess. Try not to blindly guess.
- If you’ve spent longer than 4 minutes on a problem, move on and go back to it. More than likely, you’ll realize what you’ve done wrong after you come back to it.
- Read the question carefully. Underline what the question is asking for. For example, a question asks for the freeboard above the design flow depth in feet. The design flow depth and the freeboard in inches will most likely be included in the choices.
- For Air/ Solid Waste- tab the combustion equations and R values in the EERM. Combustion/Emissions, Incineration/DRE, Stoichiometry/Material balance, Gaussian Distribution Equation/Plume Rise, Ideal Gas Law, Air Stripping, Particulate Matter control devices (baghouses, cyclones, scrubbers, ESP), Sorption/GAC, Landfills, Darcy’s Law, and Solid Waste Collection will be on the exam.
- Work and rework as much practice problems as time allows.
- Be confident. Pack your references and in your car the night before.
- Most importantly, don’t wait as long as I did while raising three children to take the exam, lol
vee043324
White Claw Pusher
omg how am i just seeing this.. 68%?! how! that's mortifying.Failed Environmental 68%. Please do not say that the cut score is 70%.
did you bomb certain sections and do really well on others?
Cut scores are typically bad in
- April Exams before mid-term elections
- When the NFC wins the Superbowl
- When
Porn StarsAdult Film Entertainers become mainstream in the news.
Last edited by a moderator:
vee043324
White Claw Pusher
same. i did terribly in the morning. how do you think it went this time around? it threw me off a little having questions on all subjects throughout the entire day.
Same thing, the morning was bad but i did well in the afternoon i do not know if i will pass or not. Yes, having all subjects was confusing. Hope all of us will pass this time
timmer1026
Active member
Maryam, any news?Failed Environmental 68%. Please do not say that the cut score is 70%.
txjennah PE
UNTZ UNTZ UNTZ
Hey @timmer1026, just now seeing this. Thanks for the advice! I won't wait until three kids to take the exam, but am kicking myself for waiting 10 years after graduating to do so
I've struggled with air the most. I'll take a look at the ASCE course, I can take it for free through my company. Thanks again
txjennah PE
UNTZ UNTZ UNTZ
Awww @Maryam, I'm so sorry.
I'll be retaking the exam in October if you need a virtual study buddy. I'm awful at air and water, but can provide some value for the 3 remediation questions you'll see on the exam.
@txjennah that was my third time so I can not take the exam before a year. Thank you. I wish you all the best in October.
HomeRuns3s
New member
Second attempt: Passed!!! The afternoon portion went so much more smoothly and carried me to a win this time! I’m sure I also did better on the Project Planning, Structural, and Site Development parts. Was in a much better rhythm and much more organized this time around.
txjennah PE
UNTZ UNTZ UNTZ
timmer1026
Active member
3 remediation questions, lol...
Yes, the air portion of the the ASCE course was excellent, definitely take it. Congrats on the marriage and wish you the best in October as well!Hey @timmer1026, just now seeing this. Thanks for the advice! I won't wait until three kids to take the exam, but am kicking myself for waiting 10 years after graduating to do so
Similar threads
Latest posts
-
-
-
-
For Sale Selling PE CIVIL Breadth and Construction Depth - EET Binders - 2023 Edition
- Latest: CivilEngineerXpert
-
-
-