Dynamic Mechanical Analysis
1/ An Introduction to Dynamic Mechanical Analysis
2/ Basic Rheological Concepts: Stress, Strain and Flow
3/ Rheology Basics: Creep-Recovery and Stress Relaxation
4/ Dynamic Testing
5/ Time-Temperature Scans: Transitions in Polymers
6/ Time and Temperature Studies: Thermosets
7/ Frequency Scans
8/ DMA Applications to Real Problems: Guidelines
http://letitbit.net/download/12673.1f43a71...alysis.rar.html
Corrosion Control Through Organic Coatings
1/ Introduction2/ Composition of the Anticorrosion Coating
3/ Waterborme Coastings
4/ Blast Cleaning and Other Heavy Surface Pretreatments
5/ Abrasive Blasting and Heavy-Metal Contamination
6/ Weathering and Aging of Paitn
7/ Corrosion Testing-Background and Theoretical Considerations
8/ Corrosion Testing-Practice
http://letitbit.net/download/87939.8a3563c...atings.rar.html
Friction, Wear, Lubrication
1/ The State of Knowledge in Tribology
2/ Strength and Deformation Properties of Solids
3/ Adhesion and Cohesion Properties of Solids: Adsorption to Solids
4/ Solid Surfaces
5/ Contact of Nonconforming Surfaces and Temperature Rise on Sliding Surfaces
6/ Friction
7/ Lubrication by Inert Fluids, Greases and Solids
8/ Wear
9/ Lubricated Sliding-Chemical and Physical Effects
10/ Equations for Friction and Wear
11/ Designing for Wear Life and Frictional Performance: Wear Testing, Friction Testing and Simulation
12/ Diagnosing Tribological Problems
http://letitbit.net/download/03558.0860d66...cation.rar.html
Dictionary of Engineering
http://letitbit.net/download/58341.5278853...eering.rar.html
Cooling and Lubrication System Maintenance
1/ Determining Cooling System
2/ Servicing the Cooling System
3/ Determining Lubrication System Serviceability
4/ Servicing the Lubrication System
http://letitbit.net/download/07139.0a81832...stem_Maintenanc
Friction and Lubrication in Mechanical Design
1/ Introduction
2/ The Contact Between Smooth Surfaces
3/ Traction Distribution and Microslip in Frictional Contacts Between Smooth Elastic Bodies
4/ The Contact Between Rough Surfaces
5/ Thermal Considerations in Tribology
6/ Design of Fluid Film Bearings
7/ Friction and Lubrication in Rolling/Sliding Contacts
8/ Wear
9/ Case Illustrations of Surfaces Damage
10/ Friction in Micromechanisms
11/ Friction-Induced Sound and Vibration
12/ Surface Coating
13/ Some Experimental Studies in Friction, Lubrication, Wear and Thermal Shock
http://adf.ly/6jOm
Geometric Dimensioning and Tolerancing for Mechanical Design
1/ Introduction to Geometric Dimensioning and Tolerancing
2/ Dimensioning and Tolerancing Fundamentals
3/ Symbols, Terms and Rules
4/ Datums
5/ Form
6/ Orientation
7/ Position, General
8/ Position, Location
9/ Position, Coaxiality
10/ Concentricity and Symmetry
11/ Runout
12/ Profile
13/ Graphic Analysis
14/ A Strategy for Tolerancing Parts
http://letitbit.net/download/61881.6591646...Design.rar.html
Fundamentals of Structural Analysis
1/ Truss Analysis: Matrix Displacement Method
2/ Truss Analysis: Force Method, Part 1
3/ Truss Analysis: Force Method, Part 2
4/ Beam and Frame Analysis: Force Method, Part 1
5/ Beam and Frame Analysis: Force Method, Part 2
6/ Beam and Frame Analysis: Force Method, Part 3
7/ Beam and Frame Analysis: Displacement Method, Part 1
8/ Beam and Frame Analysis: Displacement Method, Part 2
9/ Influence Lines
10/ Other Topics
11/ Matrix Algebra Review
12/ Solution to Problems
http://letitbit.net/download/13003.165c5a2...alysis.rar.html
Handbook of Mass Measurement
1/ Mass and Mass Standards
2/ Recalibration of Mass Standards
3/ Contamination of Mass Standards
4/ Cleaning of Mass Standards
5/ From Balance Observations to Mass Differences
6/ Glossary of Statistical Terms
7/ Measurement Uncertainy
8/ Weighing Designs
9/ Calibration of the Screen and the Built-in Weights of a Direct-Reading Analytical Balance
10/ A Look at the Electronic Balance
11/ Examples of Buoyancy Corrections in Weighing
12/ Air Density Equation
13/ Density of Solid Objects
14/ Calculation of the Density of Water
15/ Conventional Value of the Result of Weighing in Air
16/ A Comparision of Error Propagations for Mass and Conventional Mass
17/ Examination of Parameters That Can Cause Error in Mass Determinations
18/ Determination of the Mass of a Piston-Gauge Weight, Practical Uncertainy Limits
19/ Response of Apparent Mass to Thermal Gradients and Free Convective Currents
20/ Magnectic Error in Mass Metrology
21/ Effect of Gravitational Configuration of Weights on Precision of Mass Measurements
22/ Between-Time Component of Error in Mass Measurements
23/ Laboratory Standard Operating Procedure and Weighing Practices
24/ Control Charts
25/ Tolerance Testing of Mass Standards
26/ Surveillance Testing
27/ The Mass Unit Disseminated to Surrogate Laboratories Using the NIST Portable Mass Calibration Package
28/ Highly Accurate Direct Mass Measurements without the Use of External Standards
29/ The Piggyback Balance Experiment: An Illustration of Archimedes’ Principle and Newton’s Third Law
30/ The Application of the Electronic Balance in High-Precision Pycnometry
http://adf.ly/6jOt
Handbook of Corrosion Engineering
1/ Aqueous Corrosion
2/ Environments
3/ High-Temperature Corrosion
4/ Modeling, Life Prediction and Computer Applications
5/ Corrosion Failure
6/ Corrosion Maintenance Through Inspection and Monitoring
7/ Acceleration and Amplification of Corrosion Damage
8/ Materials Selection
9/ Protective Coatings
10/ Corrosion Inhibitors
11/ Cathodic Protection
12/ Anodic Protection
http://letitbit.net/download/84464.85562bc...eering.rar.html
Gear Noise and Vibration
1/ Causes of Noise
2/ Harris Mapping for Spur Gears
3/ Theoretical Helical Effects
4/ Prediction of Static T.E
5/ Prediction of Dynamic Effects
6/ Measurements
7/ Transmission Error Measurement
8/ Recording and Storage
9/ Analysis Techniques
10/ Improvements
11/ Lightly Loaded Gears
12/ Planetary and Split Drives
13/ High Contact Ratio Gears
14/ Low Contact Ratio Gears
15/ Condition Monitoring
16/ Vibration Testing
17/ Couplings
18/ Failures
19/ Strength Versus Noise
http://adf.ly/6jOx
1/ An Introduction to Dynamic Mechanical Analysis
2/ Basic Rheological Concepts: Stress, Strain and Flow
3/ Rheology Basics: Creep-Recovery and Stress Relaxation
4/ Dynamic Testing
5/ Time-Temperature Scans: Transitions in Polymers
6/ Time and Temperature Studies: Thermosets
7/ Frequency Scans
8/ DMA Applications to Real Problems: Guidelines
http://letitbit.net/download/12673.1f43a71...alysis.rar.html
Corrosion Control Through Organic Coatings
1/ Introduction2/ Composition of the Anticorrosion Coating
3/ Waterborme Coastings
4/ Blast Cleaning and Other Heavy Surface Pretreatments
5/ Abrasive Blasting and Heavy-Metal Contamination
6/ Weathering and Aging of Paitn
7/ Corrosion Testing-Background and Theoretical Considerations
8/ Corrosion Testing-Practice
http://letitbit.net/download/87939.8a3563c...atings.rar.html
Friction, Wear, Lubrication
1/ The State of Knowledge in Tribology
2/ Strength and Deformation Properties of Solids
3/ Adhesion and Cohesion Properties of Solids: Adsorption to Solids
4/ Solid Surfaces
5/ Contact of Nonconforming Surfaces and Temperature Rise on Sliding Surfaces
6/ Friction
7/ Lubrication by Inert Fluids, Greases and Solids
8/ Wear
9/ Lubricated Sliding-Chemical and Physical Effects
10/ Equations for Friction and Wear
11/ Designing for Wear Life and Frictional Performance: Wear Testing, Friction Testing and Simulation
12/ Diagnosing Tribological Problems
http://letitbit.net/download/03558.0860d66...cation.rar.html
Dictionary of Engineering
http://letitbit.net/download/58341.5278853...eering.rar.html
Cooling and Lubrication System Maintenance
1/ Determining Cooling System
2/ Servicing the Cooling System
3/ Determining Lubrication System Serviceability
4/ Servicing the Lubrication System
http://letitbit.net/download/07139.0a81832...stem_Maintenanc
Friction and Lubrication in Mechanical Design
1/ Introduction
2/ The Contact Between Smooth Surfaces
3/ Traction Distribution and Microslip in Frictional Contacts Between Smooth Elastic Bodies
4/ The Contact Between Rough Surfaces
5/ Thermal Considerations in Tribology
6/ Design of Fluid Film Bearings
7/ Friction and Lubrication in Rolling/Sliding Contacts
8/ Wear
9/ Case Illustrations of Surfaces Damage
10/ Friction in Micromechanisms
11/ Friction-Induced Sound and Vibration
12/ Surface Coating
13/ Some Experimental Studies in Friction, Lubrication, Wear and Thermal Shock
http://adf.ly/6jOm
Geometric Dimensioning and Tolerancing for Mechanical Design
1/ Introduction to Geometric Dimensioning and Tolerancing
2/ Dimensioning and Tolerancing Fundamentals
3/ Symbols, Terms and Rules
4/ Datums
5/ Form
6/ Orientation
7/ Position, General
8/ Position, Location
9/ Position, Coaxiality
10/ Concentricity and Symmetry
11/ Runout
12/ Profile
13/ Graphic Analysis
14/ A Strategy for Tolerancing Parts
http://letitbit.net/download/61881.6591646...Design.rar.html
Fundamentals of Structural Analysis
1/ Truss Analysis: Matrix Displacement Method
2/ Truss Analysis: Force Method, Part 1
3/ Truss Analysis: Force Method, Part 2
4/ Beam and Frame Analysis: Force Method, Part 1
5/ Beam and Frame Analysis: Force Method, Part 2
6/ Beam and Frame Analysis: Force Method, Part 3
7/ Beam and Frame Analysis: Displacement Method, Part 1
8/ Beam and Frame Analysis: Displacement Method, Part 2
9/ Influence Lines
10/ Other Topics
11/ Matrix Algebra Review
12/ Solution to Problems
http://letitbit.net/download/13003.165c5a2...alysis.rar.html
Handbook of Mass Measurement
1/ Mass and Mass Standards
2/ Recalibration of Mass Standards
3/ Contamination of Mass Standards
4/ Cleaning of Mass Standards
5/ From Balance Observations to Mass Differences
6/ Glossary of Statistical Terms
7/ Measurement Uncertainy
8/ Weighing Designs
9/ Calibration of the Screen and the Built-in Weights of a Direct-Reading Analytical Balance
10/ A Look at the Electronic Balance
11/ Examples of Buoyancy Corrections in Weighing
12/ Air Density Equation
13/ Density of Solid Objects
14/ Calculation of the Density of Water
15/ Conventional Value of the Result of Weighing in Air
16/ A Comparision of Error Propagations for Mass and Conventional Mass
17/ Examination of Parameters That Can Cause Error in Mass Determinations
18/ Determination of the Mass of a Piston-Gauge Weight, Practical Uncertainy Limits
19/ Response of Apparent Mass to Thermal Gradients and Free Convective Currents
20/ Magnectic Error in Mass Metrology
21/ Effect of Gravitational Configuration of Weights on Precision of Mass Measurements
22/ Between-Time Component of Error in Mass Measurements
23/ Laboratory Standard Operating Procedure and Weighing Practices
24/ Control Charts
25/ Tolerance Testing of Mass Standards
26/ Surveillance Testing
27/ The Mass Unit Disseminated to Surrogate Laboratories Using the NIST Portable Mass Calibration Package
28/ Highly Accurate Direct Mass Measurements without the Use of External Standards
29/ The Piggyback Balance Experiment: An Illustration of Archimedes’ Principle and Newton’s Third Law
30/ The Application of the Electronic Balance in High-Precision Pycnometry
http://adf.ly/6jOt
Handbook of Corrosion Engineering
1/ Aqueous Corrosion
2/ Environments
3/ High-Temperature Corrosion
4/ Modeling, Life Prediction and Computer Applications
5/ Corrosion Failure
6/ Corrosion Maintenance Through Inspection and Monitoring
7/ Acceleration and Amplification of Corrosion Damage
8/ Materials Selection
9/ Protective Coatings
10/ Corrosion Inhibitors
11/ Cathodic Protection
12/ Anodic Protection
http://letitbit.net/download/84464.85562bc...eering.rar.html
Gear Noise and Vibration
1/ Causes of Noise
2/ Harris Mapping for Spur Gears
3/ Theoretical Helical Effects
4/ Prediction of Static T.E
5/ Prediction of Dynamic Effects
6/ Measurements
7/ Transmission Error Measurement
8/ Recording and Storage
9/ Analysis Techniques
10/ Improvements
11/ Lightly Loaded Gears
12/ Planetary and Split Drives
13/ High Contact Ratio Gears
14/ Low Contact Ratio Gears
15/ Condition Monitoring
16/ Vibration Testing
17/ Couplings
18/ Failures
19/ Strength Versus Noise
http://adf.ly/6jOx
