Business Cards

[rlwfish]

I just got my new business cards with P.E. on them. I was playing around with my embosser seal and embossed one of my business cards and it looks really cool and I've never seen it before.

Is this something that is OK to do?

 

[matt267 PE]

I've never seen it done before.

I recommend you call your state board so you can be 100% sure it's ok.

 

[Ship Wreck PE]

It might break embosser using thick card stock??

 

[Road Guy]

its your stamp you can pretty much do anything you want to with it...

 

[BLG923PE]

Did you supervise the making of the card? Were you involved with determining the integrity of the card? I assume all the info is correct on the card. But...What if the card tears, gets a bent corner, etc? Idk, iffy on this one at best.

 

[rlwfish]

It might break embosser using thick card stock??

Seems to be OK so far. I probably won't be using it to seal plans for...5-10 years so I might as well put it to use.

 

[Lomarandil]

Did you supervise the making of the card? Were you involved with determining the integrity of the card? I assume all the info is correct on the card. But...What if the card tears, gets a bent corner, etc? Idk, iffy on this one at best.

Not to mention the liability for the inevitable house of cards...

 

[P-E]

I've never seen it done before.

I recommend you call your state board so you can be 100% sure it's ok.

In MA it is not okay to stamp stationary, etc.

 

[K19]

So what about moving objects then?

 

[P-E]

If it moves we can stamp it.

 

[cupojoe PE PMP]

If it moves we can stamp it.

unless you are a structural engineer...F=ma=0

 

[matt267 PE]

If it moves we can stamp it.

unless you are a structural engineer...F=ma=0

Close, but remember that it's the sum of all those forces that equal zero.

(Damn EE's)

 

[P-E]

I don't have time to stamp.

 

[cupojoe PE PMP]

If it moves we can stamp it.

unless you are a structural engineer...F=ma=0

Close, but remember that it's the sum of all those forces that equal zero.

(Damn EE's)

good point....I don't have a Sigma button on my keyboard.

Fixed and added sum of moments for the crazy folks who cantilever their buildings

ΣF=Σ(ma)=0

ΣM=0

 

[KatyLied P.E.]

If it moves we can stamp it.

unless you are a structural engineer...F=ma=0

Close, but remember that it's the sum of all those forces that equal zero.

(Damn EE's)

good point....I don't have a Sigma button on my keyboard.

Fixed and added sum of moments for the crazy folks who cantilever their buildings

ΣF=Σ(ma)=0

ΣM=0

Unless it's V = I x R I have absolutely no idea what you are talking about. :Locolaugh:

 

[ptatohed]

Moved since business cards are not (directly) related to exam results.

 

[NJmike PE]

Moved since business cards are not (directly) related to exam results.

I disagree. most people upgrade the information as a direct result of exam results.

 

[ptatohed]

Moved since business cards are not (directly) related to exam results.

I disagree. most people upgrade the information as a direct result of exam results.

Obviously (if the results are positive). But it's still not a discussion about results (especially April 2015 results). I know it isn't really a discussion about the exam either, but this 'anything' forum is the best fit for business cards, certificate frames, "P.E. vs. PE", etc. discussions, in my opinion.