Billable hours

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gb25

FInally.....an Engineer
Joined
Jun 7, 2010
Messages
38
Reaction score
5
At my small firm, we bill out approximately 160-220 hours per month/engineer. We are a geotechnical/construction engineering firm and I wanted to get a feel for what was normal with other firms? I've only worked for one firm and would like to know what other firms are doing on an hourly/engineer basis. I know some factors such as job responsibilities can come into play but just wanted to get a feel for what other firms do.

 
"220 hours"... sounds like you are working over 50 hours per week consistently??

You probably already know this but a common metrics to compare apple to apple is to calculate your utilization rate (i.e. percent of billable time).

I've heard that for engineering firms, the rule of thumb is about 50% for principals and 70%+ for employees (could even be 80%, 90%+, or 99% depending on discipline and job responsibility).

So assuming 40-hour week averaging 70% utilization firm-wide, that comes out to be 120 hours per month/engineer... (40/7*30*0.7)

 
Andy is pretty spot on from what I've seen. Just to illustrate the range in our office- Our office manager, (PE, VP) has very low utilization and is usually focused on marketing and biz development. He is around 10%. Our dept manager (principal, focused on operations) is around 50%. I'm a 15 year PE supervising employees, recruiting, marketing, doing proposals, client relations, etc, in addition to billable work and I'm about 65%. Other senior PMs are about the same. Our younger EITs, CAD techs, recent grads are at 85-90%. They are heavy focused on production.

 
Similar at my firm, 30% for very heavy business development, around 50% for project managers with a sales goal, I am at 75% as a people manager, most of the design/production staff is around 80-83%.  We cap out at 85% for engineering techs/draftsmen.  Anything over about 85% is hard to hit just based on vacation, sick, training, and normal downtime from meetings and IT issues.

 

Latest posts

Back
Top