Graffeo Ex 7

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AAGR2013

Active member
Joined
Jul 29, 2015
Messages
31
Reaction score
4
how does the load current IAB= source current Iab, and the current pass ZLN is equal to 

√3 Iab ?

 
Last edited by a moderator:
how does the load current IAB= source current Iab, and the current pass ZLN is equal to 

√3 Iab ?
I don't understand your question very well. But,  I did this problem as well and it took a long time to half-understand it. The conversion from Delta to Wye and back to Delta is a long process.

In my opinion this is not a 6 minute problem. Too many calculations.

Good luck.

 
Look on page 14-15 I think because its delta if you multiply line current by the sqrt (3) you get phase current. I look at it by the subscripts and diagram shown on 14. So if I am given IAB and I need Ia I would multiply by sqrt of 3. In this problem I would get IaA. I went straight to KVL to solve this as the conversions made no sense to me.

 

Latest posts

Back
Top