PE Seal requirement for NEW JERSEY

[ros]

Do I have to order seal right away in New Jersey. or May I wait a while. from engineer seals.com do i get rubber stamp or the self inking stamp. is self inking seal a metal one? thank you

 

[kevo_55]

I believe that NJ is a crimping state for their seals.

I would read up on the board rules for sealing items.

 

[bradlelf]

Kevo is correct ... NJ is a crimping only seal state; a rubber stamp is not acceptable.

 

[Justin Dickmeyer]

Hey ros,

Kevo and bradlelf are correct, NJ is a crimping State and digital seals or rubber stamps are not permitted. Check out Subchapter 8 it this document:

http://www.njconsumeraffairs.gov/laws/pelsregs.pdf

It should help in clarifying what you are looking for.

Take care...

 

[friend_northeast]

Does anyone know what number you need on the seel? My number is 24GE followed by 8 digits. Is this entire thing required?

 

[sewerjocky]

The NJ seal is to be a crimping seal, it can not be a rubber stamp seal.

As for the number, it should be GE XXXXX. It should have the GE letters then hte 5 digit number for your seal. The other numbers can be removed.

Example 24GE0xxxxx00; the seal number should be GE xxxxx

 

[Duke of PEarl]

Thanks for the advice guys! Its a good thing I read this post as I almost ordered a rubber stamp!

 

[NJmike PE]

Kevo is correct ... NJ is a crimping only seal state; a rubber stamp is not acceptable.

This

 

[ofareggie]

The NJ seal is to be a crimping seal, it can not be a rubber stamp seal.

As for the number, it should be GE XXXXX. It should have the GE letters then hte 5 digit number for your seal. The other numbers can be removed.

Example 24GE0xxxxx00; the seal number should be GE xxxxx

So theoretically if I ordered GExxxxx00 should I reorder a new one, or just let it be as is?