Failing Letters

[Trashman]

It looks like the highest failing score posted so far with the Transportation depth module is 49/80. I got my long awaited score today and it came out to 50/80 by my calculations. Has anyone failed with a higher score than 50/80?

 

[shahram]

seems everyone has passed the exam as there is no report here.

 

[shahram]

any body?!!

 

[ktulu]

seems everyone has passed the exam as there is no report here.

You need to go to the first page of this thread. Some diagnostics are posted there.

ktulu

 

[shahram]

You need to go to the first page of this thread. Some diagnostics are posted there.
ktulu

but those are not from California. those have been posted before California sent the results.

 

[eng.dork]

Alright, here is my diagnostic report from the test. I took the power afternoon. Any suggestions would be greatly appreciated....

Eng. Econ.-100%

Safety-100%

Electric Circuits-40%

Electric & Magnetic Field Theory-100%

Computer Systems-0%

Electronics (components)-33%

Electronics (Materials)-50%

Controls & Communications Systems-83%

Power-Transmisson & Distr.-80%

Power-Rotating Machines-67%

General Power-Measure-50%

General Power-Special Applications-100%

General Power-Codes, standards-67%

Circuit Analysis (Analysis)-33%

Circuit Analysis-Devices and Power electronic circuits-33%

Circuit analysis-Electric and Magnetic fields-0%

Rotating Machines-71%

Electromagnetic Devices-25%

Transmission-System analysis-33%

Transmission-Power system performance-50%

Transmission-Protection-50%

 

[Andros]

I know that nobody likes to admit failing, etc. but the last couple of result periods we got several members to post their diagnostic sheets for each discipline and we could fairly well estimate what the cut score was.
If you can scan your diagnostic and post it on this thread, we can help decipher the exam. Or just type it in.

The more the better to help figure it out too. You can research the past exams and see how we have done this.

It may not be helpful to anyone, but I know that most all wonder.

Hi DVINNY and everyone else,

I got theses scores for October 2006 Civil PE - Water Resouces Afternoon , I have resat for October 2007 and awaiting new results

Could you help me to figure out my overall score for 2006. Here is the Diagnostic results,

Breadth

Environmental 63% @20% 5/8

Geotechnical 50% @20% 4/8

Structural 88% @20% 7/8

Transportation 13% @20% 1/8

Water Resources 75% @20% 6/8

Depth

Hydraulics 64% Hydraulics, Hydrology & Water Treatment there were 26 problems @ 65%

Water Treatment 33%

Hydrology 50%

Environmental 40% @25% 4/10

Geotechnical 75% @10% 3/4

 

[DVINNY]

Hi DVINNY and everyone else,
I got theses scores for October 2006 Civil PE - Water Resouces Afternoon , I have resat for October 2007 and awaiting new results

Could you help me to figure out my overall score for 2006. Here is the Diagnostic results,

Breadth

Environmental 63% @20% 5/8

Geotechnical 50% @20% 4/8

Structural 88% @20% 7/8

Transportation 13% @20% 1/8

Water Resources 75% @20% 6/8

Depth

Hydraulics 64% Hydraulics, Hydrology & Water Treatment there were 26 problems @ 65%

Water Treatment 33%

Hydrology 50%

Environmental 40% @25% 4/10

Geotechnical 75% @10% 3/4

welcome to the site, you know that there is a "PEsoon2B" here, and he is a charachter to say the least, good guy but ....... Hope that won't make things difficult on ya. LOL.

I think you have the morning figured out.

23/40

As far as the afternoon,

9/14

2/6

3/6

4/10

3/4

21/40 - afternoon

TOTAL of 44/80

 

[rcurras]

Based on my analysis [i took the test last April (first time), planning to retake it April 08]:

AM (Electrical Eng): 26 out of 40.PM (Power): 18 out of 40.

Total: 44 out of 80 (55%)
In my opinion, this was an awful performance. Let’s see if I can improve next time.

Thanks.

RC

 

[Dark Knight]

I am not going into the details but in order to pass the EE Power you have to have 52/80 to pass.

That estimate is based on the times I failed and how did I feel when I passed.

 

[Andros]

Hi DVINNY and everyone else,
I got theses scores for October 2006 Civil PE - Water Resouces Afternoon , I have resat for October 2007 and awaiting new results

Could you help me to figure out my overall score for 2006. Here is the Diagnostic results,

Breadth

Environmental 63% @20% 5/8

Geotechnical 50% @20% 4/8

Structural 88% @20% 7/8

Transportation 13% @20% 1/8

Water Resources 75% @20% 6/8

Depth

Hydraulics 64% Hydraulics, Hydrology & Water Treatment there were 26 problems @ 65%

Water Treatment 33%

Hydrology 50%

Environmental 40% @25% 4/10

Geotechnical 75% @10% 3/4

thanks dvinny,

I met the other character(PESOON2BE) somehow wish i could change my name to "andros". well thanks for your response.

 

[DVINNY]

You can change your name in your MY CONTROLS section, or if you want, I can change it for you. Let me know if you are serious

 

[Andros]

You can change your name in your MY CONTROLS section, or if you want, I can change it for you. Let me know if you are serious

I am serious, Dvinny

 

[mr. smee]

Hey all:

The following stats are from when I failed the April 2006 offering of the 8-hour. It comes out to an assumed raw score of 56/80, which is 70%. I was very upset. If anything, this should simply serve as a reminder that sometimes a raw score of 70% shouldn't be your standard. Strive to get everything correct on that test. When I failed, I knew why: I slacked off in studying my structural and transpo, and I didn't study the basic concepts of environmental (definitions and theory and such).

When I retested in October 2006, I destroyed the morning section and did very well in the afternoon (I took environmental). For those of you who came close to passing, don't give up!

Smee

*************************

Morning Session

Environmental 50% (4/8)

Geotechnical 75% (6/8)

Structural 50% (4/8)

Transportation 75% (6/8)

Water 88% (7/8)

Total Correct: 27

Afternoon Session

Wastewater 63% (5/8*)

Biology 88% (7/8*)

Solid/Hazardous Waste 80% (4/5*)

Groundwater 60% (3/5*)

Geotechnical 100% (4/4)

Water 60% (6/10)

Total Correct: 29

Total: 56

56/80 = 0.7

*Denominators assumed. See CERM 9th ed. pg xvii for assumed breakdown for Environmental.

 

[Andros]

You can change your name in your MY CONTROLS section, or if you want, I can change it for you. Let me know if you are serious

Thanks for the name change DVINNY, I really appreciate it.

andros

 

[jdd18vm]

Ok, I will be brave and submit my results. Let me know what you make of this. I took the Electrical Power PE exam in Minnesota. Please help me interpret this.
Well, I tried to post my score sheet that I scanned but this message board wont let me upload it. So, I will type it out here:

Basic ELE - Professionalism and Eng. Econ 100%

Basic ELE - Safety and Reliability 100%

Basic ELE - Electric Circuits 60%

Basic ELE - Electric and Magnetic Field Theory 100%

Basic ELE - Computer Systems and Engr 50%

Electronic, Circuits and Components - Components 33%

Electronic, Circuits and Components - Materials 100%

Controls and Communications Systems 67%

Power - Transmission and Distribution 60%

Power - Rotation Machines and Electromagnetic Devices 100%

General Power - Measure, Instrument and Statistics 50%

General Power - Special Applications 100%

General Power - Codes, Standards, and Special Appls 67%

Circuit Analysis - Analysis 33%

Circuit Analysis - Devices and Power Electronic Circuits 67%

Circuit Analysis - Electric and Magnetic Fields adn Applications 50%

Rotating Machines 71%

Electromagnetic Devices 25%

Transmission and Distrib - System Analysis 33%

Transmission and Distrib - Power System Performance 50%

Transmission and Distrib - Protection 25%

Thanks,

Nick

WOW I didnt do that well

 

[jdd18vm]

Here is mine. In my opinion this confirmed what I feared going in, and how I felt at lunch, and later that night. The morning killed me, while better in the afternoon, not good enough.

Credit to Nick for the Copy paste

Basic ELE - Professionalism and Eng. Econ 50%

Basic ELE - Safety and Reliability 67%

Basic ELE - Electric Circuits 40%

Basic ELE - Electric and Magnetic Field Theory and Apps 0%

Basic ELE - Computer Systems and Engr 50%

Electronic, Circuits and Components - Components 50%

Electronic, Circuits and Components - Materials 50%

Controls and Communications Systems 0%

Power - Transmission and Distribution 40%

Power - Rotation Machines and Electromagnetic Devices 67%

General Power - Measure, Instrument and Statistics 50%

General Power - Special Applications 0% (Stupid Lighting question should have been a chip shot)

General Power - Codes, Standards, and Special Appls 67%

Circuit Analysis - Analysis 33%

Circuit Analysis - Devices and Power Electronic Circuits 67%

Circuit Analysis - Electric and Magnetic Fields and Applications 100%

Rotating Machines 100%

Electromagnetic Devices 75%

Transmission and Distrib - System Analysis 67%

Transmission and Distrib - Power System Performance 100%

Transmission and Distrib - Protection 25%

 

[mudpuppy]

Didn't want just the Civils to get an anlysis:

Here is mine. In my opinion this confirmed what I feared going in, and how I felt at lunch, and later that night. The morning killed me, while better in the afternoon, not good enough.
Credit to Nick for the Copy paste

Basic ELE - Professionalism and Eng. Econ 50% 1/2

Basic ELE - Safety and Reliability 67% 2/3

Basic ELE - Electric Circuits 40% 4/10

Basic ELE - Electric and Magnetic Field Theory and Apps 0% 0/1

Basic ELE - Computer Systems and Engr 50% 1/2

Electronic, Circuits and Components - Components 50% 3/6

Electronic, Circuits and Components - Materials 50% 1/2

Controls and Communications Systems 0% 0/6

Power - Transmission and Distribution 40% 2/5

Power - Rotation Machines and Electromagnetic Devices 67% 2/3

Morning Total 16/40

General Power - Measure, Instrument and Statistics 50% 1/2

General Power - Special Applications 0% 0/1

General Power - Codes, Standards, and Special Appls 67% 2/3

Circuit Analysis - Analysis 33% 2/6

Circuit Analysis - Devices and Power Electronic Circuits 67% 2/3

Circuit Analysis - Electric and Magnetic Fields and Applications 100% 2/2

Rotating Machines 100% 7/7

Electromagnetic Devices 75% 3/4

Transmission and Distrib - System Analysis 67% 4/6

Transmission and Distrib - Power System Performance 100% 2/2

Transmission and Distrib - Protection 25% 1/4

Afternoon Total 26/40

 

[ccollet]

[SIZE=12pt]Breadth - AM[/SIZE]

[SIZE=12pt] [/SIZE]

[SIZE=12pt]Envir. 50% [/SIZE]

[SIZE=12pt]Geo. 38% [/SIZE]

[SIZE=12pt]Struct. 63%[/SIZE]

[SIZE=12pt]Transp. 75% [/SIZE]

[SIZE=12pt]WS 63% [/SIZE]

[SIZE=12pt] [/SIZE]

[SIZE=12pt] [/SIZE]

[SIZE=12pt]Depth - PM[/SIZE]

[SIZE=12pt] [/SIZE]

[SIZE=12pt]Traffic Anlys. 67% [/SIZE]

[SIZE=12pt]Traffic Plan 75%[/SIZE]

[SIZE=12pt]Traffic Design 89%[/SIZE]

[SIZE=12pt]Geotech. 83% [/SIZE]

[SIZE=12pt]Water Resours 63% [/SIZE]

 

[Polysloman]

[SIZE=12pt]Breadth - AM[/SIZE]
[

You got the Trans in the bag. Do more Soil and Struc probs. You'll get it.