Civil Engineer - DynCorp Int. - UAE

[DynCorp International]

Job Summary
 
The Civil Engineer shall provide complete design services including preparation of civil site work drawings and water/sewer designs based on existing local utilities and facility load and use.
 
Principal Accountabilities

• Provide designs, preparing drawings, statements of work, and project cost estimates for their respective discipline.
  
• Compile and integrate work of other disciplines into the project design documentation.
  
• Perform design work for new construction, renovations and improvement projects for real property facilities and utility systems
  
• Interpret and adapt traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
  
• Provide civil design services including preparation of civil/site work drawings, structural evaluations and designs, airfield pavements and water/sewer/storm water designs based on existing local utilities and facility load and use.
  
• Follow and implement Standard Operating Procedures (SOP) for design review and project mobilization as necessary
  
• Comply with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment
  
• Performing construction management duties including reviewing construction documents and submittals, performing and documenting daily inspections, and assisting with project punch lists.
  
• Perform other qualified duties as assigned
  

Knowledge & Skills

• Shall be familiar with USAF programming rules and documentation.
  
• Thorough knowledge of civil design and engineering techniques.
  
• Proficient in creating designs simple enough for local construction contractors to complete
  
• Excellent communications, effective leadership and interpersonal skills.
  
• Proficient using Microsoft Office and Project, etc.
  

Experience & Education

• Licensed professional civil engineer (PE) licensed to practice in the US
  
• Four (4) or more years of design experience
  
• Have experience with AutoCAD 2012 software
  
• Previous experience working on US Government and Military domestic and international projects preferred. 
  
• Familiarity with military programming rules and documentation is desirable.
  

Physical Requirements/Working Environment

• Living and working conditions at the assignment location could be remote and uncomfortable.
  
• Long hours, exposure to weather and hazardous conditions.
  
• Personnel should be aware of moving on short notice and under adverse conditions.
  

Travel

• Ability to travel domestically and internationally
  

APPLY: https://dyncorp.taleo.net/careersection/jobdetail.ftl?job=1601354