JoeysVee
MASTER SPAMMER!
I have gone back over the NCEES sample exams and the solutions to those. I've noticed that since I'm running out of time and guessing on a few at the end that sometimes those few I don't get to are really easy. So I'm thinking about changing my strategy a little. I was just working the problems straight through and struggling with some and spending a lot of time on those forcing me to guess at the end on the problems left over. Now I'm thinking about skipping a lot of problems and going back to work on those.
I'm really good at the HVAC problems since that is my depth area. Also, 30% of the problems in the morning are "Basic Engineering Practice" which are real easy problems. I also expect about 2 non-quantitative (quick) problems outside of the HVAC and basic eng practice. So between the basic engineering practice, HVAC and non-quantitative problems that's around 21 problems. So I'm thinking about going through the morning section and only working those ~21 problems first. This should built confidence since I'll get most of those right and they shouldn't take 6 minutes each. I would expect to be finished with these problems (about half of the 40) in way less than 2 hours. This will give me more time to work the problems I'm not as good at.
As I go through the problems the first time I will be skipping all the other problems (thermal, fluids and MS problems) which I will mark as T, F, or M. Personally, my worst area is the Mechanical Systems so my 2nd time through the morning section I would just work the T and F problems. I'm sure I'll still be guessing on some problems at the end of the morning but this way all guessing at the end will be on problems I'm not that good at anyways...some of the ~8 MS problems.
I'm wondering if this is a good plan? Did you (or are you) doing it this way or something similar? Maybe this is how most of you did it (or will do it) and I'm just the last one to figure this out.
I'm good enough with the HVAC that the afternoon should require me to only get ~28 in the morning...and I'm thinking this plan may be the best way to get to that 28.
Any thoughts? Are you going to employ a similar strategy or just work them straight through....keep in mind, I'm not finishing the morning section.
Thanks for your input guys! :thumbs:
I'm really good at the HVAC problems since that is my depth area. Also, 30% of the problems in the morning are "Basic Engineering Practice" which are real easy problems. I also expect about 2 non-quantitative (quick) problems outside of the HVAC and basic eng practice. So between the basic engineering practice, HVAC and non-quantitative problems that's around 21 problems. So I'm thinking about going through the morning section and only working those ~21 problems first. This should built confidence since I'll get most of those right and they shouldn't take 6 minutes each. I would expect to be finished with these problems (about half of the 40) in way less than 2 hours. This will give me more time to work the problems I'm not as good at.
As I go through the problems the first time I will be skipping all the other problems (thermal, fluids and MS problems) which I will mark as T, F, or M. Personally, my worst area is the Mechanical Systems so my 2nd time through the morning section I would just work the T and F problems. I'm sure I'll still be guessing on some problems at the end of the morning but this way all guessing at the end will be on problems I'm not that good at anyways...some of the ~8 MS problems.
I'm wondering if this is a good plan? Did you (or are you) doing it this way or something similar? Maybe this is how most of you did it (or will do it) and I'm just the last one to figure this out.
I'm good enough with the HVAC that the afternoon should require me to only get ~28 in the morning...and I'm thinking this plan may be the best way to get to that 28.
Any thoughts? Are you going to employ a similar strategy or just work them straight through....keep in mind, I'm not finishing the morning section.
Thanks for your input guys! :thumbs:
Last edited by a moderator: