It looks like the highest failing score posted so far with the Transportation depth module is 49/80. I got my long awaited score today and it came out to 50/80 by my calculations. Has anyone failed with a higher score than 50/80?
Failing Letters
- Thread starter DVINNY
- Start date
Help Support Professional Engineer & PE Exam Forum:
S
shahram
seems everyone has passed the exam as there is no report here.
S
shahram
any body?!!
ktulu
Well-known member
You need to go to the first page of this thread. Some diagnostics are posted there.
ktulu
S
shahram
but those are not from California. those have been posted before California sent the results.
Alright, here is my diagnostic report from the test. I took the power afternoon. Any suggestions would be greatly appreciated....
Eng. Econ.-100%
Safety-100%
Electric Circuits-40%
Electric & Magnetic Field Theory-100%
Computer Systems-0%
Electronics (components)-33%
Electronics (Materials)-50%
Controls & Communications Systems-83%
Power-Transmisson & Distr.-80%
Power-Rotating Machines-67%
General Power-Measure-50%
General Power-Special Applications-100%
General Power-Codes, standards-67%
Circuit Analysis (Analysis)-33%
Circuit Analysis-Devices and Power electronic circuits-33%
Circuit analysis-Electric and Magnetic fields-0%
Rotating Machines-71%
Electromagnetic Devices-25%
Transmission-System analysis-33%
Transmission-Power system performance-50%
Transmission-Protection-50%
Eng. Econ.-100%
Safety-100%
Electric Circuits-40%
Electric & Magnetic Field Theory-100%
Computer Systems-0%
Electronics (components)-33%
Electronics (Materials)-50%
Controls & Communications Systems-83%
Power-Transmisson & Distr.-80%
Power-Rotating Machines-67%
General Power-Measure-50%
General Power-Special Applications-100%
General Power-Codes, standards-67%
Circuit Analysis (Analysis)-33%
Circuit Analysis-Devices and Power electronic circuits-33%
Circuit analysis-Electric and Magnetic fields-0%
Rotating Machines-71%
Electromagnetic Devices-25%
Transmission-System analysis-33%
Transmission-Power system performance-50%
Transmission-Protection-50%
Hi DVINNY and everyone else,
I got theses scores for October 2006 Civil PE - Water Resouces Afternoon , I have resat for October 2007 and awaiting new results
Could you help me to figure out my overall score for 2006. Here is the Diagnostic results,
Breadth
Environmental 63% @20% 5/8
Geotechnical 50% @20% 4/8
Structural 88% @20% 7/8
Transportation 13% @20% 1/8
Water Resources 75% @20% 6/8
Depth
Hydraulics 64% Hydraulics, Hydrology & Water Treatment there were 26 problems @ 65%
Water Treatment 33%
Hydrology 50%
Environmental 40% @25% 4/10
Geotechnical 75% @10% 3/4
DVINNY
2-time 10K winner
welcome to the site, you know that there is a "PEsoon2B" here, and he is a charachter to say the least, good guy but ....... Hope that won't make things difficult on ya. LOL.
I think you have the morning figured out.
23/40
As far as the afternoon,
9/14
2/6
3/6
4/10
3/4
21/40 - afternoon
TOTAL of 44/80
rcurras
Well-known member
Based on my analysis [i took the test last April (first time), planning to retake it April 08]:
AM (Electrical Eng): 26 out of 40.PM (Power): 18 out of 40.
Total: 44 out of 80 (55%)
In my opinion, this was an awful performance. Let’s see if I can improve next time.
Thanks.
RC
AM (Electrical Eng): 26 out of 40.PM (Power): 18 out of 40.
Total: 44 out of 80 (55%)
In my opinion, this was an awful performance. Let’s see if I can improve next time.
Thanks.
RC
Dark Knight
Silent Guardian
I am not going into the details but in order to pass the EE Power you have to have 52/80 to pass.
That estimate is based on the times I failed and how did I feel when I passed.
That estimate is based on the times I failed and how did I feel when I passed.
thanks dvinny,
I met the other character(PESOON2BE) somehow wish i could change my name to "andros". well thanks for your response.
DVINNY
2-time 10K winner
You can change your name in your MY CONTROLS section, or if you want, I can change it for you. Let me know if you are serious
M
mr. smee
Hey all:
The following stats are from when I failed the April 2006 offering of the 8-hour. It comes out to an assumed raw score of 56/80, which is 70%. I was very upset. If anything, this should simply serve as a reminder that sometimes a raw score of 70% shouldn't be your standard. Strive to get everything correct on that test. When I failed, I knew why: I slacked off in studying my structural and transpo, and I didn't study the basic concepts of environmental (definitions and theory and such).
When I retested in October 2006, I destroyed the morning section and did very well in the afternoon (I took environmental). For those of you who came close to passing, don't give up!
Smee
*************************
Morning Session
Environmental 50% (4/8)
Geotechnical 75% (6/8)
Structural 50% (4/8)
Transportation 75% (6/8)
Water 88% (7/8)
Total Correct: 27
Afternoon Session
Wastewater 63% (5/8*)
Biology 88% (7/8*)
Solid/Hazardous Waste 80% (4/5*)
Groundwater 60% (3/5*)
Geotechnical 100% (4/4)
Water 60% (6/10)
Total Correct: 29
Total: 56
56/80 = 0.7
*Denominators assumed. See CERM 9th ed. pg xvii for assumed breakdown for Environmental.
The following stats are from when I failed the April 2006 offering of the 8-hour. It comes out to an assumed raw score of 56/80, which is 70%. I was very upset. If anything, this should simply serve as a reminder that sometimes a raw score of 70% shouldn't be your standard. Strive to get everything correct on that test. When I failed, I knew why: I slacked off in studying my structural and transpo, and I didn't study the basic concepts of environmental (definitions and theory and such).
When I retested in October 2006, I destroyed the morning section and did very well in the afternoon (I took environmental). For those of you who came close to passing, don't give up!
Smee
*************************
Morning Session
Environmental 50% (4/8)
Geotechnical 75% (6/8)
Structural 50% (4/8)
Transportation 75% (6/8)
Water 88% (7/8)
Total Correct: 27
Afternoon Session
Wastewater 63% (5/8*)
Biology 88% (7/8*)
Solid/Hazardous Waste 80% (4/5*)
Groundwater 60% (3/5*)
Geotechnical 100% (4/4)
Water 60% (6/10)
Total Correct: 29
Total: 56
56/80 = 0.7
*Denominators assumed. See CERM 9th ed. pg xvii for assumed breakdown for Environmental.
Here is mine. In my opinion this confirmed what I feared going in, and how I felt at lunch, and later that night. The morning killed me, while better in the afternoon, not good enough.
Credit to Nick for the Copy paste
Basic ELE - Professionalism and Eng. Econ 50%
Basic ELE - Safety and Reliability 67%
Basic ELE - Electric Circuits 40%
Basic ELE - Electric and Magnetic Field Theory and Apps 0%
Basic ELE - Computer Systems and Engr 50%
Electronic, Circuits and Components - Components 50%
Electronic, Circuits and Components - Materials 50%
Controls and Communications Systems 0%
Power - Transmission and Distribution 40%
Power - Rotation Machines and Electromagnetic Devices 67%
General Power - Measure, Instrument and Statistics 50%
General Power - Special Applications 0% (Stupid Lighting question should have been a chip shot)
General Power - Codes, Standards, and Special Appls 67%
Circuit Analysis - Analysis 33%
Circuit Analysis - Devices and Power Electronic Circuits 67%
Circuit Analysis - Electric and Magnetic Fields and Applications 100%
Rotating Machines 100%
Electromagnetic Devices 75%
Transmission and Distrib - System Analysis 67%
Transmission and Distrib - Power System Performance 100%
Transmission and Distrib - Protection 25%
Credit to Nick for the Copy paste
Basic ELE - Professionalism and Eng. Econ 50%
Basic ELE - Safety and Reliability 67%
Basic ELE - Electric Circuits 40%
Basic ELE - Electric and Magnetic Field Theory and Apps 0%
Basic ELE - Computer Systems and Engr 50%
Electronic, Circuits and Components - Components 50%
Electronic, Circuits and Components - Materials 50%
Controls and Communications Systems 0%
Power - Transmission and Distribution 40%
Power - Rotation Machines and Electromagnetic Devices 67%
General Power - Measure, Instrument and Statistics 50%
General Power - Special Applications 0% (Stupid Lighting question should have been a chip shot)
General Power - Codes, Standards, and Special Appls 67%
Circuit Analysis - Analysis 33%
Circuit Analysis - Devices and Power Electronic Circuits 67%
Circuit Analysis - Electric and Magnetic Fields and Applications 100%
Rotating Machines 100%
Electromagnetic Devices 75%
Transmission and Distrib - System Analysis 67%
Transmission and Distrib - Power System Performance 100%
Transmission and Distrib - Protection 25%
[SIZE=12pt]Breadth - AM[/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt]Envir. 50% [/SIZE]
[SIZE=12pt]Geo. 38% [/SIZE]
[SIZE=12pt]Struct. 63%[/SIZE]
[SIZE=12pt]Transp. 75% [/SIZE]
[SIZE=12pt]WS 63% [/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt]Depth - PM[/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt]Traffic Anlys. 67% [/SIZE]
[SIZE=12pt]Traffic Plan 75%[/SIZE]
[SIZE=12pt]Traffic Design 89%[/SIZE]
[SIZE=12pt]Geotech. 83% [/SIZE]
[SIZE=12pt]Water Resours 63% [/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt]Envir. 50% [/SIZE]
[SIZE=12pt]Geo. 38% [/SIZE]
[SIZE=12pt]Struct. 63%[/SIZE]
[SIZE=12pt]Transp. 75% [/SIZE]
[SIZE=12pt]WS 63% [/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt]Depth - PM[/SIZE]
[SIZE=12pt] [/SIZE]
[SIZE=12pt]Traffic Anlys. 67% [/SIZE]
[SIZE=12pt]Traffic Plan 75%[/SIZE]
[SIZE=12pt]Traffic Design 89%[/SIZE]
[SIZE=12pt]Geotech. 83% [/SIZE]
[SIZE=12pt]Water Resours 63% [/SIZE]
Polysloman
Well-known member
Similar threads
