Timber Roof on top of an RC Slab

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kelles

New member
Joined
Aug 7, 2013
Messages
3
Reaction score
0
Hello everyone,

I am designing a timber roof on top of an RC slab, the space in middle needs to be usable space, the gable walls are constructed from clay bricks,

As you can see the roof structure is made up of rafters supported by the wall plate at the edges and by a stud wall further in the middle with the rest of the rafter left to cantilever in the middle of the roof, with a ridge beam in the middle. Rafters are spaced at 610mm centres

The concept model is shown below

MONASTIRI_v10_-_Structural_Model_-_33_-_Timber_Roof_Design_3_ScreenShot_24102017_185550_ia9zeo.jpg


MONASTIRI_v10_-_Structural_Model_-_33_-_Timber_Roof_Design_3_ScreenShot_24102017_200519_dzk4vh.jpg


MONASTIRI_v10_-_Structural_Model_-_33_-_Timber_Roof_Design_3_ScreenShot_24102017_184822_b9lfol.jpg


MONASTIRI_v10_-_Structural_Model_-_33_-_Timber_Roof_Design_3_ScreenShot_24102017_184149_ld47dr.jpg


Rafters - Wall plate connection

My main question now is, how shall I connect the rafters to the wall plate? I have talked with the roof contractor and we have different thoughts on how this should be done therefore i wanted to get some suggestions from experienced engineers. So what do you guys think>

Screen_Shot_2017-11-01_at_00.13.50_unja0f.png


 

Latest posts

Back
Top