Silly question about standard dielectric absorption ratio

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

akyip

Well-known member
Joined
Feb 7, 2020
Messages
422
Reaction score
203
Hey guys,

I have a silly question about dielectric absorption ratio.

Many times I have seen that the standard dielectric absorption ratio R 60 sec / R 30 sec judges insulation condition as follows:

DAR < 1: Bad or dangerous insulation

1 =< DAR < 1.25: Questionable insulation

1.25 =< DAR < 1.4: Good Insulation

DAR >= 1.6: Excellent insulation

My question is, what about values of DAR ranging inclusively from 1.4 to less than 1.6? Do those fall under good insulation?

 
For Dielectric Absorption Ratio : 60/30 Second : 1-1.25 (Questionable), 1.4 - 1.6 (Good), >1.6 (Excellent)

Some also use..


1.4 or more (Excellent), 


1.25 - 1.0 (Good),


1.0 or less (bad) 

 
Like PEExam123 said, I'd assume they're good. Not sure if we'd get that on the actual test though since the handbook doesnt give us those ranges. hmm 

 
For Dielectric Absorption Ratio : 60/30 Second : 1-1.25 (Questionable), 1.4 - 1.6 (Good), >1.6 (Excellent)

Some also use..


1.4 or more (Excellent), 


1.25 - 1.0 (Good),


1.0 or less (bad) 
Hm, so here what about the valued between 1.25 and 1.4? Do these values count as only good insulation?

 
Hm, so here what about the valued between 1.25 and 1.4? Do these values count as only good insulation?
In real life, at that point I would go for 10 min. reading which will give us polarization index.

If I recall correctly from a top of my head for PI: Reading of less than 1 will be consider dangerous; 1 to 2 will be questionable, 2 to 4 - good and above 4 excellent.

Here is a good guide by megger that I refer to alot https://www.instrumart.com/assets/Megger-Guide-to-Insulation-Testing.pdf

 
From what I've seen if it's over 1 the equipment is put back in service assuming there hasn't been a decrease over time. (if historical records are properly maintained and checked) There a lot of different policies on this though depending on where you work. I've never heard anyone debate over whether the readings were very good vs excellent. When the debate takes place it's usually about if it's good or bad.
 
Back
Top