Search results

APR 2019 PASS 58% of 1041 first time takers 39% of 745 repeat takers ~50% of total test takers OCT 2018 PASS 54% of 1033 first time takers 27% of 678 repeat takers ~43% of total test takers Didn't someone say the APR 2019 exam was going to be a little different/easier than those in the...

http://engr.case.edu/merat_francis/eit/home.html I wanted as much information as possible, this site provided some useful problems, hopefully someone finds it worthwhile

[No message]

I wanted to post my experience with the exam as I hope it will help someone in the future in a similar situation. I graduated in 2007 with a BS in EE and have been working since then in many different fields/jobs.  I got into the electrical utility industry in 2016.  I took the Electrical FE in...

Would you pay $20 to know your results right now, if you knew they were coming out Wed next week?

 Question is a 3 phase delta-wye 30MVA, 33kv/11kV transformer is protected by a differential relay Calculate the relay current setting for faults up to 200 percent of the rated current.  the CT current ratio is 500/5 for primary and 2000/5 on secondary. The solution is attached.  I understand...

i just found this free sample exam website and i like it.   anyone else use this?  how hard did you find it?  some questoins are easy, hard, medium, however i have a 100% through 40 problems so i'd like to see how others have done.

The NCEES practice exam is very specific on it's NEC questions and states......"According to the 201X NEC..........." then asks the question. I don't remember exactly, but I don't think the actual exam asked the questions in this same manner.  I hope this isn't divulging too much but I think it...

Ugh feel annoyed I can't solve this.... help! This feels like a good question for the exam

Ideal 25kVA 480/120V 1PH transformer is to be used as an autotransformer supplying load from a 480V source If it is in Buck mode, and the coils are carrying rated current, the max KVA load the transformer can accomodate is? 75kVA answer I came up with 100kVA Is somehow "coils carrying rated...

Ideal 25kVA 480/120V 1PH transformer is to be used as an autotransformer supplying load from a 480V source If it is in Buck mode, and the coils are carrying rated current, the max KVA load the transformer can accomodate is? 75kVA answer I came up with 100kVA Is somehow "coils carrying rated...

Going for my second try in October.  I failed with a 48.  I had about 2 months to study while having a full time job and young children, so I contribute most of my failure to lack of time to study (but company paying for test so take it and fail or maybe pass, instead of waiting another 6...

A Delta-Delta transformer, 10:1, Primary side line V = 1732, Primary side line I = 17.3, 0.94 lagging PF, ABC phase sequence PRIMARY SIDE: VAB=VL=1732<0 PF angle = cos-1(.94) = -20 deg IL=17.3<(0-20)=17.3<-20 deg IAB=(IL/1.73)<(+30deg) = 10<(-20+30)=10<+10 deg Is what I...

Is Ibase incorrect here?  Shouldn't it be using 13.8kV instead of 1kV?

A 480VRMS AC single phase source is sent through a single phase half wave rectifier.  What is the average voltage at the output of the rectifier? Answer: Vmax = sqrt(2)*Vrms= 679 Vavg = (1/2pi) * integral of 679sin(theta) from 0 to pi = 216 V To me, when I see the solution, Vmax was chosen...

If there is an NEC question on sizing a circuit breaker, is it considered a code and standard question or a protection question; or both?

How similar have you found all of the exams you have taken?  Similar in difficulty and questions? I just took it for my first time and failed.  I did not have a lot of time to prepare and I have kids which made it even more difficult.  However, after reviewing all of the material and practice...

FAIL POWER 48