Search results

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. McEngr

    CA PLS Exam Results (April 2019)

    I took the CA Seismic exam about 5 years ago.  I also took the survey exam.  I wanted to see how the exam format went, so I just took both exams without studying.  Since I'm a structural guy, I passed the Seismic but failed the survey.  Would CA accept my seismic exam if I took the survey exam...
  2. McEngr

    SE Exam - Computer Based Exam 2024

    Performance-based design will be the only option for structural engineers 100 years from now.  Half of what we do will be done with AI.
  3. McEngr

    SE Exam - Computer Based Exam 2024

    I suggest they make the SE exam a condition for passing an ME or MS in civil engineering.  Otherwise, it's meaningless.  A masters+SE at final capstone course+2 additional years under a PE-structural or SE and then apply for the exam. NCEES and ABET need to make the scope of the license more...
  4. McEngr

    SFRS for braced frame decks

    I'd be curious what system you guys use for SFRS in accordance with Table 12.2-1 of ASCE 7-10.  I tell engineers to design with a cantilevered column system, let the braces stiffen up the system if desired to do so or if needed, but use an R=1.5 per G.6.   Using an R=6.5 is incorrect, of course...
  5. McEngr

    CONNECTORS

    This is a rather open-ended question.  It all depends on whether the connection involves a side member of steel or wood, whether the species of lumber is DF, SP, HM, SPF, etc...  In general, the diameter of a dowel-type fastener will increase the capacity of the connection, but there are also...
  6. McEngr

    Waiting

    Having been an SE grader in the past, I think it's more important that you show your work clearly and write down the quick/necessary steps to get to the final answer if you don't have time.  Just my 2 cents.  :)
  7. McEngr

    Lateral Force Distribution Collector Question

    Is the brace a tension-only member?  If so, the drag load diagram is totally different.  It collects all the way to the far end of the braced bay, drops immediately, then tapers back up.  
  8. McEngr

    Which SE course have you taken? Did you pass?

    I took the kaplan course.  I passed both exams first try.  The courses may help eliminate some uncertainty.  I remember a Dr. Tim something from South Carolina that was pretty good.  I saw a bouyancy problem from that course that I never would've suspected on the exam.  Guess what - the course...
  9. McEngr

    Detailing Reference

    While I wouldn't recommend this book for general practice (because it's too simplified), I would go with the ICC's Seismic & Wind Forces Structural Design Examples (3rd or 4th edition).  I took the SE in 2012 and referenced concrete for quick and easy moment frame detailing guides.  For...
  10. McEngr

    Prestressed question

    good discussion guys.  that's what this forum is for! :)
  11. McEngr

    Bearing stiffeners design

    zaidfadhill, I think you need to take a step back and look at it from the purpose of chapter B.  Your stiffeners are essentially with a KL/r <= 25 which is clearly written in section J4.4 as an Fcr=Fy. Thanks for stopping by.
  12. McEngr

    SEAW Refresher Course Notes

    My personal opinion is that the SEAW course notes are not well organized. You would have to take several hand calculations from the likes of Degenkolb and KPFF engineers and compile them yourself from a CD-ROM. That was my experience a few years back... I personally would pour over the SEAOC...
  13. McEngr

    Overstrength Factor Applicability Ωo

    You're welcome! The fact you are asking the question means you're far along into the more advanced PE and SE topics. :) Good luck!
  14. McEngr

    Overstrength Factor Applicability Ωo

    D1.4a Required Strength ^^This is the section I'm referring to. You use the amplified seismic load, but this is a lower bound. In almost all cases for SDC D thru F, your post-buckling forces will exceed this. However, both should be checked. This comparison is obvious of you look at some of...
  15. McEngr

    Overstrength Factor Applicability Ωo

    AISC 341-10 essentially requires you to design all columns for overstrength now. At least for me, on the west coast, if I'm designing an AISC 341 system, I'm using overstrength columns... This was a big deal in '05 where you had to be careful. Now, it's more conservatively using the...
  16. McEngr

    Revit transfer to RISA and vice versa...

    thought - I don't mean to be condescending. I've used RISA for 15 years (since college). I understand RISA pretty well. There have been times when I can't even delete a node when it comes from a transfer file. It makes me a little nervous as I've never encountered that in RISA. Anyhow, when...
  17. McEngr

    Revit transfer to RISA and vice versa...

    thoughtofthis - I'm not a big fan of these software programs being an end all, be all, to structural analysis. I've come across a few engineers that are great at running an analysis program, but they couldn't come up with a hand calc to prove the results they are doing. The issue that I have...
  18. McEngr

    Revit transfer to RISA and vice versa...

    Has anyone found success in transfterring from Revit to Risa? I have found all sorts of problems in the transfer - and I'm not optimistic that it will ever be nice. I'm a little concerned because the principal structural engineer may think it's an untapped benefit, and I hate to be the killer...
  19. McEngr

    AISC 341-10 errors

    Has anyone discovered any errors in the SCBF design example sections? I'm particularly concerned about some of the connection design issues between sheets 5-218 to 5-222. I felt very comfortable with the old AISC '-5 provision's examples, but the new formatting may have some errors in it - and...
  20. McEngr

    ACI 314 Design Aids

    ^^^ I agree. PCA Notes is the best resource. You can order the PDF from concrete.org for free!
Back
Top