NCEES 121

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

roadrunner

Member
Joined
Jan 25, 2010
Messages
11
Reaction score
0
A synchronous generator is 3 phase wye connected and rated 1131 kva, 2.4 kv, 0.9 lagging. the output current from the generator at rated full load is most nearly:

Why do you use the formula Sbase = Sq root 3 Vbase Ibase

I just used the S=VI formula and got it wrong. Tad confused

 
S=VI* is valid for single-phase devices.

S=sqrt3VI* is the power equation for three-phase devices.

 
Thanks Flyer! Hope you know how important to this forum you are, your help is GREATLY appreciated

 
Why is this not S=3*Vp*Ip... instead we used S=3*VL*IL
Typically, 3-phase voltage values are given as line-to-line voltages and 3-phase current values are given as line currents. If you are given 3-phase voltage/current/power values and they don't specify whether it's line-to-line or line-to-neutral values, you need to assume that:
  • the voltages given are line-to-line voltage values
  • the currents given are line current values
  • the power values given (W, VA, or VAR) are 3-phase power values
So here in this problem with the 3-phase synchronous generator, the 1131 KVA given is 3-phase apparent power and the 2.4 KV voltage given is line-to-line voltage. So |S 3-ph| = sqrt(3) x |V LL| x |I L|, and line current magnitude value |I L| = |S 3-ph| / (sqrt(3) x |V LL|).

I also attached a brief derivation of the apparent 3-phase power formula. Please note that this is magnitude only |S 3-ph|.
 

Attachments

  • S 3-ph derivation.jpg
    S 3-ph derivation.jpg
    38 KB · Views: 16
A synchronous generator is 3 phase wye connected and rated 1131 kva, 2.4 kv, 0.9 lagging. the output current from the generator at rated full load is most nearly:

Why do you use the formula Sbase = Sq root 3 Vbase Ibase

I just used the S=VI formula and got it wrong. Tad confused

These are two different formulas. The first calculates the apparent power for a three-phase system or machine, and the second calculates the apparent power for a single-phase system or machine, or the per-phase power of a three-phase system or machine.

These two formulas are very commonly misused. If you'd like to dig further with more examples of how these can be used both correctly AND incorrectly, take a look at the following article:

Avoid These Three Phase Power Formula Mistakes! (Electrical PE Review)
 
Why is the power factor not involved in the answer, is this because it would be the overall current of the generator and not the output?
 
Back
Top