Jump to content


Photo

Left-Turn length question


12 replies to this topic

#1 miloc

miloc

    Project Engineer

  • Senior Member
  • 69 posts
  • Gender:Male
  • Discipline:Civil

Posted 20 March 2012 - 10:29 PM

How would you answer this question:

Attached Files



#2 cbi

cbi

    Intern

  • Members
  • 22 posts
  • Discipline:Civil

Posted 21 March 2012 - 09:39 AM

http://transportatio...xDOT_5290-1.pdf

Check out this methodology.

#3 jaa046

jaa046

    Intern

  • Members
  • 19 posts
  • Gender:Male
  • Location:Indianapolis
  • Discipline:Civil

Posted 21 March 2012 - 03:44 PM

How would you answer this question:


Easiest way is to use formula give in Traffic Engineering Handbook, Pg: 332

L = VK25(1+p)/Nc

v= peak 15-min flow rate
K = constant to reflact random arrival of vehicle, usually 2
p = percent trucks
Nc = no. of cycle per hour
= 300*2*25 (1+0.1)/40

Answer is B = 413 ft

#4 miloc

miloc

    Project Engineer

  • Senior Member
  • 69 posts
  • Gender:Male
  • Discipline:Civil

Posted 21 March 2012 - 09:21 PM


How would you answer this question:


Easiest way is to use formula give in Traffic Engineering Handbook, Pg: 332

L = VK25(1+p)/Nc

v= peak 15-min flow rate
K = constant to reflact random arrival of vehicle, usually 2
p = percent trucks
Nc = no. of cycle per hour
= 300*2*25 (1+0.1)/40

Answer is B = 413 ft


You are in the right direction. I have the answer but it does not make sense (so far) for me. How did you know about that formula? I looked in the index but couldnt find it. The solution also involves deceleration length. I didn't include the answer bc I want to know if it is possible to get it with the HCM or Green Book instead.

#5 Road Guy

Road Guy

    35 years and a wakeup

  • Admin
  • 17,228 posts
  • Gender:Male
  • Location:Colorado
  • Interests:Yoga Pants, Ski!, SCUBA, Backpacking, Kicking Ass, etc
  • Discipline:Construction

Posted 22 March 2012 - 01:38 AM

I would hope that even if the formula answer gave 1000' that ncees wouldn't have that as an answer or even a question, cause there aren't any 1000' left turn lanes around....

#6 kenny911

kenny911

    Project Manager

  • Senior Member
  • 108 posts
  • Discipline:Civil

Posted 22 March 2012 - 03:05 AM

I'm curious to the solution myself.

#7 jaa046

jaa046

    Intern

  • Members
  • 19 posts
  • Gender:Male
  • Location:Indianapolis
  • Discipline:Civil

Posted 22 March 2012 - 12:01 PM

I came across similar problem in 6 min. solutions and they had referred to same formula in their solution.

#8 ptatohed

ptatohed

    Chief Engineer

  • Supporting Member
  • 1,561 posts
  • Gender:Male
  • Location:Murrieta, CA
  • Discipline:Civil

Posted 22 March 2012 - 04:42 PM

Not sure if I am helping or not. This is just a quick and dirty rule of thumb but, using it, I get answer B.

X vph = X feet of Storage. Transition length usually = 90' for lower speeds, 120' for higher speeds.

Storage + Transition = Total left turn length

300 + say,100 = 400'

#9 Peele1

Peele1

    Principal in Charge

  • Senior Member
  • 315 posts
  • Discipline:Electrical

Posted 22 March 2012 - 10:47 PM

I would hope that even if the formula answer gave 1000' that ncees wouldn't have that as an answer or even a question, cause there aren't any 1000' left turn lanes around....


We have some left turn lanes around that are two or three wide and over a quarter mile long...

Traffic engineers here have a lot of challenges, and I think that they have to throw away the book. With the 2nd worst traffic in the country here in the Metro DC area, often the answer to the question above would be "how much room do we have?" The politics and cause and effect of everything must be weighed. Relieving congestion at one intersection often just makes it worse at the next one.

For example in the question above, it may need to be longer if the next street has a high amount of left turners, therefore resulting in a blockage of the left turn lane at this intersection as people stack up to turn left at the next street...


On a similar topic, do traffic models use vehicles that during slow-downs, will merge into the on-ramp of a highway just to pass a few cars, therefore slowing down traffic more, causing more people to get into the on-ramp to cut back in?

#10 civilized_naah

civilized_naah

    Principal in Charge

  • Registered Vendor
  • 358 posts
  • Gender:Male
  • Location:Maryland
  • Discipline:Civil

Posted 23 March 2012 - 01:21 AM

On a similar topic, do traffic models use vehicles that during slow-downs, will merge into the on-ramp of a highway just to pass a few cars, therefore slowing down traffic more, causing more people to get into the on-ramp to cut back in?

Unfortunately, there is no model for idiocy - there is a dire need for such models in the DC area

#11 miloc

miloc

    Project Engineer

  • Senior Member
  • 69 posts
  • Gender:Male
  • Discipline:Civil

Posted 26 March 2012 - 03:30 PM

Thanks for all your input guys. I did ask to the senior traffic engineer in my office about why and how to find the equation and table in the IE traffic engineering handbook, the answer "It's something that you have to know", as simple as that. P.S. there's a little mistake in the solution regarding the table (or isn't it?) the figure mentioned is for RIGHT-TURN deceleration bay, the question asks for LEFT-TURN.

p.s. I couldnt find the option to upload an image. I'm pasting the solution:

See Figure 10-15 in Traffic Engineering Handbook by ITE

STEP 1 - First determine the required deceleration length (d2+d3) using Table 10-7A

of ITE Traffic Engineering Handbook

Deceleration length for 50 mph speed = 565 ft

STEP 2 - Compute storage length (d4) using left-turn storage length equation

25(L =VK 1+ p) / Nc = 300*2*25(1+0.1)/40 = 412.50 ft


STEP 3 - Total left-turn bay length = 565+412.5 = 977.50 ft

Answer C

#12 Ambrug20

Ambrug20

    Project Engineer

  • Senior Member
  • 193 posts
  • Gender:Female
  • Location:Memphis, TN
  • Interests:Working on Trasportation PE
  • Discipline:Civil

Posted 30 March 2012 - 12:04 AM

I was going to send exact the same explanation as Jaa046 and few more guys which describe the solution in the same way. One more thing is puzzle me. There is 10% trucks and there is a table in (attached) saying s=30 (not 25). If i use data from the table my answer wouldn't be correct. why this data and table are given?

the answer is 413= C

I was trying to attache the table, but can't find how to do it here.
trucks avarage vech. length
<4% - 25
5% 27
10% 30
15% 35


Help me with attachment button, please

#13 ptatohed

ptatohed

    Chief Engineer

  • Supporting Member
  • 1,561 posts
  • Gender:Male
  • Location:Murrieta, CA
  • Discipline:Civil

Posted 16 June 2012 - 07:55 AM

Thanks for all your input guys. I did ask to the senior traffic engineer in my office about why and how to find the equation and table in the IE traffic engineering handbook, the answer "It's something that you have to know", as simple as that. P.S. there's a little mistake in the solution regarding the table (or isn't it?) the figure mentioned is for RIGHT-TURN deceleration bay, the question asks for LEFT-TURN.

p.s. I couldnt find the option to upload an image. I'm pasting the solution:



See Figure 10-15 in Traffic Engineering Handbook by ITE

STEP 1 - First determine the required deceleration length (d2+d3) using Table 10-7A

of ITE Traffic Engineering Handbook

Deceleration length for 50 mph speed = 565 ft

STEP 2 - Compute storage length (d4) using left-turn storage length equation

25(L =VK 1+ p) / Nc = 300*2*25(1+0.1)/40 = 412.50 ft



STEP 3 - Total left-turn bay length = 565+412.5 = 977.50 ft

Answer C


miloc,

I have the 5th edition (not the 6th) but on page 329 of the TEH, under the "Left-Turn Deceleration Lane" heading, last sentence of the second to last paragraph, it states that Fig 10-15 and Table 10-7 can be used for left turns (even though the figure is titled as right turn).

Thanks for posting the answer.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

=