Jump to content


Photo

NCEES WR/ENV 2011 sample question 509


6 replies to this topic

#1 Jacob_PE

Jacob_PE

    Principal in Charge

  • Senior Member
  • 207 posts
  • Gender:Male
  • Location:Poplar Bluff, MO
  • Discipline:Civil

Posted 03 September 2011 - 10:39 PM

For an open channel flow question where you have a known Q and are solving for an unknown rectangular width, using Manning's you'll have the unknown width in the numerator and denominator of the left side of the equation. I have an HP33s and Casio fx115es and have briefly reviewed their equation solving abilities, but I'm still not clear on how to solve the problem without trial and error. Is it even possible?

#2 civilized_naah

civilized_naah

    Principal in Charge

  • Registered Vendor
  • 354 posts
  • Gender:Male
  • Location:Maryland
  • Discipline:Civil

Posted 04 September 2011 - 03:58 AM

QUOTE (Jacob @ Sep 3 2011, 06:39 PM) <{POST_SNAPBACK}>
For an open channel flow question where you have a known Q and are solving for an unknown rectangular width, using Manning's you'll have the unknown width in the numerator and denominator of the left side of the equation. I have an HP33s and Casio fx115es and have briefly reviewed their equation solving abilities, but I'm still not clear on how to solve the problem without trial and error. Is it even possible?

Using tables for these unknown depth (or breadth) problems is best. The CERM and the All In One have these tables.

#3 Jacob_PE

Jacob_PE

    Principal in Charge

  • Senior Member
  • 207 posts
  • Gender:Male
  • Location:Poplar Bluff, MO
  • Discipline:Civil

Posted 05 September 2011 - 12:21 AM

QUOTE (civilized_naah @ Sep 3 2011, 10:58 PM) <{POST_SNAPBACK}>
QUOTE (Jacob @ Sep 3 2011, 06:39 PM) <{POST_SNAPBACK}>
For an open channel flow question where you have a known Q and are solving for an unknown rectangular width, using Manning's you'll have the unknown width in the numerator and denominator of the left side of the equation. I have an HP33s and Casio fx115es and have briefly reviewed their equation solving abilities, but I'm still not clear on how to solve the problem without trial and error. Is it even possible?

Using tables for these unknown depth (or breadth) problems is best. The CERM and the All In One have these tables.

Right on.
Design Q=3000cfs
Q=KS^(1/2)
Q=(K1+K2)S^(1/2)
K2S^(1/2) = 1149.82cfs [10' deep end]
K1S^(1/2) = 1850.18cfs [6' deep end]
All-in-one K' = 28.818542
use table on of 507, x=.035938, b=166.95'
CERM K' = 42.676
use table on pg A-40, x=.034, b=176.45'
CERM is far more accurate since table gives x value every hundredth instead if every 2 hundredth.
Available answers are spread very far apart so using the All-in-one still golden.



#4 civilized_naah

civilized_naah

    Principal in Charge

  • Registered Vendor
  • 354 posts
  • Gender:Male
  • Location:Maryland
  • Discipline:Civil

Posted 07 September 2011 - 01:46 AM

QUOTE (Jacob @ Sep 4 2011, 08:21 PM) <{POST_SNAPBACK}>
Design Q=3000cfs
K2S^(1/2) = 1149.82cfs [10' deep end]
K1S^(1/2) = 1850.18cfs [6' deep end]

Not sure what you mean by 10 ft deep end vs 6 ft deep end. Can you post the entire problem?

#5 Jacob_PE

Jacob_PE

    Principal in Charge

  • Senior Member
  • 207 posts
  • Gender:Male
  • Location:Poplar Bluff, MO
  • Discipline:Civil

Posted 07 September 2011 - 01:58 AM

QUOTE (civilized_naah @ Sep 6 2011, 08:46 PM) <{POST_SNAPBACK}>
QUOTE (Jacob @ Sep 4 2011, 08:21 PM) <{POST_SNAPBACK}>
Design Q=3000cfs
K2S^(1/2) = 1149.82cfs [10' deep end]
K1S^(1/2) = 1850.18cfs [6' deep end]

Not sure what you mean by 10 ft deep end vs 6 ft deep end. Can you post the entire problem?

It's a rectangular channel with a 'step in the middle' right side is 50' wide and 10' deep, left side is unknown' wide and 6' deep. n=.14 left side and n=.05 right side, s=.001 ft per ft. Need 3000 cfs, find unknown width.

#6 Environmental_Guy

Environmental_Guy

    Intern

  • Members
  • 34 posts
  • Gender:Male
  • Location:San Diego, CA
  • Discipline:Civil

Posted 23 September 2011 - 05:49 PM

Which NCEES sample exam book is this question from? Is it the 2008 book with the color photo cover?

It sounds like a good problem and I'd like to work it but I'm not quite understanding the problem or solution. Thanks!

#7 Jacob_PE

Jacob_PE

    Principal in Charge

  • Senior Member
  • 207 posts
  • Gender:Male
  • Location:Poplar Bluff, MO
  • Discipline:Civil

Posted 23 September 2011 - 06:06 PM

QUOTE (Environmental_Guy @ Sep 23 2011, 12:49 PM) <{POST_SNAPBACK}>
Which NCEES sample exam book is this question from? Is it the 2008 book with the color photo cover?

It sounds like a good problem and I'd like to work it but I'm not quite understanding the problem or solution. Thanks!

It's from the 2011 sample questions, there's one similar in the All-in-one book but it only has you solve for Q and it's trapezoidal, but you use the d/b tables just like when solving for K and K'. I might be able to do a write up of the problem, scan and post it some time.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

=