PE Seal requirement for NEW JERSEY

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ros

Member
Joined
Feb 5, 2011
Messages
23
Reaction score
0
Do I have to order seal right away in New Jersey. or May I wait a while. from engineer seals.com do i get rubber stamp or the self inking stamp. is self inking seal a metal one? thank you

 
I believe that NJ is a crimping state for their seals.

I would read up on the board rules for sealing items.

 
Kevo is correct ... NJ is a crimping only seal state; a rubber stamp is not acceptable.

 
Does anyone know what number you need on the seel? My number is 24GE followed by 8 digits. Is this entire thing required?

 
The NJ seal is to be a crimping seal, it can not be a rubber stamp seal.

As for the number, it should be GE XXXXX. It should have the GE letters then hte 5 digit number for your seal. The other numbers can be removed.

Example 24GE0xxxxx00; the seal number should be GE xxxxx

 
Thanks for the advice guys! Its a good thing I read this post as I almost ordered a rubber stamp!

 
The NJ seal is to be a crimping seal, it can not be a rubber stamp seal.

As for the number, it should be GE XXXXX. It should have the GE letters then hte 5 digit number for your seal. The other numbers can be removed.

Example 24GE0xxxxx00; the seal number should be GE xxxxx
So theoretically if I ordered GExxxxx00 should I reorder a new one, or just let it be as is?

 
Back
Top