Help: Graffeo Ex. 10

Professional Engineer & PE Exam Forum

Help Support Professional Engineer & PE Exam Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

applepieordie

Active member
Joined
Feb 21, 2017
Messages
28
Reaction score
0
Can someone please explain to me ex.10 in the graffeo EE guide to passing the power PE book?

I don't understand how to get 22.78 49.4 degress from Zld = 35(j30)/(35+j30)

 
I am assuming you're serious and no offense intended but I would recommend a review of basics like this before taking exam.

If I write the numerator as 35 /_ 0 times 30 /_ 90 and you multiply those by multiplying magnitude and adding angles does that help you out?

 
yea, i was being dead serious. it just wasn't coming to me how to convert the 35xj30 to polar (been out of school for a long time). Thanks for the tip. The trigonometry is slowly coming back to me.

 
it is certainly a good idea to understand the "trigonometry" but absolutely no reason to do the math by hand.

need that recommended calulator

 
Using casio fx-115es, You need to set your calculator to "Complex" Mode first

Then you can literally put in those numbers in at once. 

Its hard to explain on hete, It's on page E-25 of the fx-115 es plus manual. It would save you tons of time if you know how to use those functions. 

 
Back
Top