Sign in to follow this  
Followers 0
abourne

What are the chances that I passed the PE?

75 posts in this topic

I took the Mechanical - Thermo-Power-Fluids

Summary of my scoring estimates:

Morning

Worst case: 25 / 40 - 63%

Probable case: 27.5 / 40 - 70%

Best case: 30 / 40 - 75%

Afternoon

Worst case - 20 / 40 - 50% (I'm sure I did better than this)

Likely case - 25+ / 40 - 63%

Best case: 70-75% if I did well on guessing (20-25% of guessing correct).

----------------

I heard that the Machine Design and Thermo people are feeling good about the test. Hence, this might increase the benchmark for passing.

I'm hoping I scored above the median.

I know where my strengths are, Thermodynamics, Fluids, and Pumps. If I take it again, I'm going to need to focus more on HVAC, Heat Transfer, and Combustion.

Results won't be out until mid to late January.

Edited by abourne

Share this post


Link to post
Share on other sites

wow. how did you all have time/energy to figure these imaginary percentages and manage to take the test? My head was swimming by the end of each session there is no way I could have spent braincells thinking about that when i took it.

Share this post


Link to post
Share on other sites

worst case = 45/80 That doesn't cut it.

Probable case = 52.5 out of 80 That doesn't cut it

Best case = 60/80 That cuts it.

I say, that in 6 months, be sure that your worst case is 80/80. I'll bet your chances on passing will be great.

but seriously, never "shoot for" 56/80 always study and "shoot for" 80/80

then, if you miss a few, no big deal.

wow. how did you all have time/energy to figure these imaginary percentages and manage to take the test? My head was swimming by the end of each session there is no way I could have spent braincells thinking about that when i took it.

When I took it, I had a symbol that I put next to the question number. The 3 symbols represented YES (correct) NO, GUESS

I knew where I stood when I left the exam.

Share this post


Link to post
Share on other sites

Keep in mind that you may have gotten a problem here or there wrong that you "know" you got right. Trying to estimate the number of problems you got correct is an exercise in futility in my opinion.

Share this post


Link to post
Share on other sites
I took the Mechanical - Thermo-Power-Fluids

Summary of my scoring estimates:

Morning

Worst case: 25 / 40 - 63%

Probable case: 27.5 / 40 - 70%

Best case: 30 / 40 - 75%

Afternoon

Worst case - 20 / 40 - 50% (I'm sure I did better than this)

Likely case - 25+ / 40 - 63%

Best case: 70-75% if I did well on guessing (20-25% of guessing correct).

----------------

I heard that the Machine Design and Thermo people are feeling good about the test.

I'm hoping I scored above the median.

There is a simple answer:

Worst case: You will fail

Probable case: You will probably pass

Best case: You will pass

Just relax and have fun waiting. There is nothing you can do now. This come from somebody that worried beyond limits while waiting and made a fool of himself in the process. Do not make that mistake.

Share this post


Link to post
Share on other sites
Just relax and have fun waiting. There is nothing you can do now. This come from somebody that worried beyond limits while waiting and made a fool of himself in the process. Do not make that mistake.

Every man (woman) must create their own destiny.

not sayin', but just sayin'

Share this post


Link to post
Share on other sites
worst case = 45/80 That doesn't cut it.

Probable case = 52.5 out of 80 That doesn't cut it

Best case = 60/80 That cuts it.

I say, that in 6 months, be sure that your worst case is 80/80. I'll bet your chances on passing will be great.

but seriously, never "shoot for" 56/80 always study and "shoot for" 80/80

then, if you miss a few, no big deal.

wow. how did you all have time/energy to figure these imaginary percentages and manage to take the test? My head was swimming by the end of each session there is no way I could have spent braincells thinking about that when i took it.

When I took it, I had a symbol that I put next to the question number. The 3 symbols represented YES (correct) NO, GUESS

I knew where I stood when I left the exam.

I guess that would work, but would require additional thought/reminder to always make the mark and tally at the end.

Keep in mind that you may have gotten a problem here or there wrong that you "know" you got right. Trying to estimate the number of problems you got correct is an exercise in futility in my opinion.

Thats sort of what I was thinking.

I really had no clue how I did when I walked out of the room when I took it. Yes I understood many of the problems, but I also fell for some of the trick answers, some I know I caught and fixed, but there probably others i didn't.

I guess what I'm saying to all of you recent test takers, don't get bogged down, stressed out, or really waste the energy on something that is presently out of your control. It will make the wait a lot easier. It is what it is.

next the annoyance will be why it takes so long to grade a stupid scantron sheet!

Share this post


Link to post
Share on other sites
worst case = 45/80 That doesn't cut it.

Probable case = 52.5 out of 80 That doesn't cut it

Best case = 60/80 That cuts it.

From my review teacher, Rich:

The MS&M and T&F guys are feeling pretty good about the test; and for the the 2nd test in a row the HVAC guys are looking for a knife to cut their throat. If you think you got ~70%, then you are almost sure to pass the exam. I think the cut score is usually a little bit lower.

Share this post


Link to post
Share on other sites
next the annoyance will be why it takes so long to grade a stupid scantron sheet!

Results won't be out until mid to late January. I understand the NCEES undergoes a detailed statistical analysis on each problem and determines a cutoff. Next, the states decide their cutoff, although many follow the NCEES's recommendation.

Share this post


Link to post
Share on other sites
next the annoyance will be why it takes so long to grade a stupid scantron sheet!

Results won't be out until mid to late January. I understand the NCEES undergoes a detailed statistical analysis on each problem and determines a cutoff. Next, the states decide their cutoff, although many follow the NCEES's recommendation.

Does anybody know if the new NCEES registration will speed things up?

Share this post


Link to post
Share on other sites
next the annoyance will be why it takes so long to grade a stupid scantron sheet!

Results won't be out until mid to late January. I understand the NCEES undergoes a detailed statistical analysis on each problem and determines a cutoff. Next, the states decide their cutoff, although many follow the NCEES's recommendation.

oh i know that...but from past experiences come about 8 weeks from now the conversations will start centering around why it take so long to grade a scantron.

They really need to invent a sarcasm font.

Share this post


Link to post
Share on other sites

Isn't the overall pass rate around 55% for ME's?

(I know it's generally lower for CE's, Chem-E's, EE's, etc.)

Hence, my hoping to score above the median.

Share this post


Link to post
Share on other sites

¿ɥǝ ˙˙ʇuoɟ ɯsɐɔɹɐs ɹnoʎ sɐ sıɥʇ ǝsn pןnoɔ noʎ

Share this post


Link to post
Share on other sites
Isn't the overall pass rate around 55% for ME's?

(I know it's generally lower for CE's, Chem-E's, EE's, etc.)

Hence, my hoping to score above the median.

According to NCEES it's 69% first timers, 41% retakers. California lumps the two on their results pages and historically it's been in the 45-55 range I think

Share this post


Link to post
Share on other sites
Isn't the overall pass rate around 55% for ME's?

(I know it's generally lower for CE's, Chem-E's, EE's, etc.)

Hence, my hoping to score above the median.

Actually, Chem E's first time pass rate is usually one of the highest.

Share this post


Link to post
Share on other sites

Yes, for ME's, the First timers range from 60-70%, repeat takers, around 33-39%.

But I've heard overall, it's about 55%

Share this post


Link to post
Share on other sites

Don't you guys know that they just throw all of the exams in a giant hat, and pick out 70% of them?!?!

Share this post


Link to post
Share on other sites
¿ɥǝ ˙˙ʇuoɟ ɯsɐɔɹɐs ɹnoʎ sɐ sıɥʇ ǝsn pןnoɔ noʎ

how'd you do that?

Share this post


Link to post
Share on other sites
Don't you guys know that they just throw all of the exams in a giant hat, and pick out 70% of them?!?!

Does anyone have any guesses as to why the repeat takers passing percentage is so much lower than first time takers?

Share this post


Link to post
Share on other sites
¿ɥǝ ˙˙ʇuoɟ ɯsɐɔɹɐs ɹnoʎ sɐ sıɥʇ ǝsn pןnoɔ noʎ

how'd you do that?

Turn the keyboard around?

Share this post


Link to post
Share on other sites

I took the ME- Mechanical Systems & Materials test.

The morning was pretty good, I had 3-5 that I was unsure of and 1-2 that I KNEW had errors in the problem itself. Since we can't talk about the problems I can't say which ones. I know some will be thrown out.

the afternoon session kicked my butt! I had to skip 10 problems right off the bat due to excessive length or I was unfamiliar with the topic. Once I got the others I was able to calm down and either work out the others or make educated guesses.

I think I did okay, but we'll see after the new year!

Oh, the pencils were white with green letters. We got to keep ours and were told that.

Share this post


Link to post
Share on other sites
Don't you guys know that they just throw all of the exams in a giant hat, and pick out 70% of them?!?!

Are you serious?

I'm not sure because you didn't use the sarcasm font.

Share this post


Link to post
Share on other sites
Does anyone have any guesses as to why the repeat takers passing percentage is so much lower than first time takers?

Because if someone isn't capable of passing the first time, they probably aren't capable of passing the second time. Remember, only the bottom third of examinees have to retake the test.

Share this post


Link to post
Share on other sites
Does anyone have any guesses as to why the repeat takers passing percentage is so much lower than first time takers?

Because if someone isn't capable of passing the first time, they probably aren't capable of passing the second time. Remember, only the bottom third of examinees have to retake the test.

Ouch!!!!!!!!

Share this post


Link to post
Share on other sites
Because if someone isn't capable of passing the first time, they probably aren't capable of passing the second time. Remember, only the bottom third of examinees have to retake the test.

Now I don't know about that. I think it also has to do with study habits. A coworker of mine didn't pass the first time. He relied on Testmasters course exclusively, and didn't study much outside of class. He failed. He took the exam a second time - and this time he applied himself to studying - and he passed.

That said, if someone studies like crazy and fails, then I'd wonder about their techniques for studying, and if they're studying the right material. I took the Testmasters course; I honestly don't think I would have done as well going at it "on my own" as having the course in my corner. The course made me dig in and study (err, rather, my attitude about the course made me dig in - after all, the $1700 course was paid out of my own pocket, you bet I'm going to apply myself!). The course forced me to look hard at stuff I probably would not have emphasized.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0